Profile: 3M Medical Specialties and OEM Products offers solutions, technologies and services for health care product development. We produce a wide range of medical tapes, diagnostic components and optical supplies. We also offer OEM procedure tray products and medical sterilization specialties. Our 3M™ polyester diagnostic tape 9794R is a hydrophobic acrylic adhesive coated on optically clear polyester film, high strength film designed for rigidity & durability of finished device & provided on a white paper release liner. Our optical products are recognized by optical laboratories around the world to assist in the manufacturing of prescription optics. Our Hi-Performance STS Polyethylene, 4.4 mil double coated tape 1517, 58# is a highly conformable double coated medical tape consisting of a 1 mil polyethylene backing. It provides excellent adhesion to most medical device substrates.

FDA Registration Number: 1717046

1 to 50 of 254 Products/Services (Click for related suppliers)  Page: [1] 2 3 4 5 6

• Abdominal Binders (FDA Code: FSD / 880.5160)

• Absorbent Acrylic Dressings

• Adhesive Bandage Strip

• Adhesive Bandages (FDA Code: KGX / 880.5240) A medical adhesive tape or adhesive bandage is a device intended for medical purposes that consists of a strip of fabric material or plastic, coated on one side with an adhesive, and may include a pad of surgical dressing without a disinfectant. The device is used to cover and protect wounds, to hold together the skin edges of a wound, to support an injured part of the body, or to secure objects to the skin.

• Adhesive Cloth

• Adhesive Elastic Bandage Tape

• Adhesive operation Paper

• Adhesive Plastic

• Adhesive Strips & Patches

• Adhesive Surgical Paper

• Adhesive Surgical synthetic Paper

• Adhesive Tape Solvent (FDA Code: KOX / 878.4730) A surgical skin degreaser or an adhesive tape solvent is a device that consists of a liquid such as 1,1,2-trichloro-1,2,2-trifluoroethane; 1,1,1-trichloroethane; and 1,1,1-trichloroethane with mineral spirits intended to be used to dissolve surface skin oil or adhesive tape.

• Adhesive Waterproof

• Adhesive Wound Skin Closures

• Aluminum Finger Splints

• Anti-Fog Surgical Mask with Adhesive Tape

• Antimicrobial Wound Skin Closures (reinforced)

• Arm Slings (FDA Code: ILI / 890.3640) An arm sling is a device intended for medical purposes to immobilize the arm, by means of a fabric band suspended from around the neck.

• Arm Supports (FDA Code: IOY / 890.3475) A limb orthosis (brace) is a device intended for medical purposes that is worn on the upper or lower extremities to support, to correct, or to prevent deformities or to align body structures for functional improvement. Examples of limb orthoses include the following: A whole limb and joint brace, a hand splint, an elastic stocking, a knee cage, and a corrective shoe.

• Athletic Elastic Wraps and Tapes

• Autoclaves

• Automatic Autoclaves

• Bags, Wraps & Tubing

• Bandage Adhesive Cloth

• Bandages Adhesive Plastic

• Biocompatible Synthetic Surgical Sealant

• Biological Sterilization Process Indicator (FDA Code: FRC / 880.2800) A biological sterilization process indicator is a device intended for use by a health care provider to accompany products being sterilized through a sterilization procedure and to monitor adequacy of sterilization. The device consists of a known number of microorganisms, of known resistance to the mode of sterilization, in or on a carrier and enclosed in a protective package. Subsequent growth or failure of the microorganisms to grow under suitable conditions indicates the adequacy of sterilization.

• Biomedical Electrodes

• Blend Tone Wound Skin Closures (non-reinforced)

• Bone Particle Collector (FDA Code: MXP / 874.4800) A bone particle collector is a filtering device intended to be inserted into a suction tube during the early stages of otologic surgery to collect bone particles for future use.

• Cast Bandage (FDA Code: ITG / 890.3025) A prosthetic and orthotic accessory is a device intended for medical purposes to support, protect, or aid in the use of a cast, orthosis (brace), or prosthesis. Examples of prosthetic and orthotic accessories include the following: A pelvic support band and belt, a cast shoe, a cast bandage, a limb cover, a prosthesis alignment device, a postsurgical pylon, a transverse rotator, and a temporary training splint.

• Cast Covers (FDA Code: KIA / 880.6185) A cast cover is a device intended for medical purposes that is made of waterproof material and placed over a cast to protect it from getting wet during a shower or a bath.

• Casting Materials

• Casting Materials and Equipment, Casting Stands

• Casting Tapes

• Catheter Accessories (FDA Code: KGZ / 878.4200) An introduction/drainage catheter is a device that is a flexible single or multilumen tube intended to be used to introduce nondrug fluids into body cavities other than blood vessels, drain fluids from body cavities, or evaluate certain physiologic conditions. Examples include irrigation and drainage catheters, pediatric catheters, peritoneal catheters (including dialysis), and other general surgical catheters. An introduction/drainage catheter accessory is intended to aid in the manipulation of or insertion of the device into the body. Examples of accessories include adaptors, connectors, and catheter needles.

• Cervical Orthosis (FDA Code: IQK / 890.3490) A truncal orthosis is a device intended for medical purposes to support or to immobilize fractures, strains, or sprains of the neck or trunk of the body. Examples of truncal orthoses are the following: Abdominal, cervical, cervical-thoracic, lumbar, lumbo-sacral, rib fracture, sacroiliac, and thoracic orthoses and clavicle splints.

• Chemical Color Change Thermometer (FDA Code: FQZ / 880.2900) A clinical color change thermometer is a disposable device used to measure a patient's oral, rectal, or axillary (armpit) body temperature. The device records body temperature by use of heat sensitive chemicals which are sealed at the end of a plastic or metal strip. Body heat causes a stable color change in the heat sensitive chemicals.

• Circular Staplers

• Clinical Mercury Thermometers (FDA Code: FLK / 880.2920) A clinical mercury thermometer is a device used to measure oral, rectal, or axillary (armpit) body temperature using the thermal expansion of mercury.

• Cohesive Elastic Bandage

• Cohesive Elastic Bandage Wrap

• Computed Tomography X-Ray System (FDA Code: JAK / 892.1750) A computed tomography x-ray system is a diagnostic x-ray system intended to produce cross-sectional images of the body by computer reconstruction of x-ray transmission data from the same axial plane taken at different angles. This generic type of device may include signal analysis and display equipment, patient and equipment supports, component parts, and accessories.

• Conmed Electrosurgery

• Continuous Electronic Thermometer (FDA Code: FLL / 880.2910) A clinical electronic thermometer is a device used to measure the body temperature of a patient by means of a transducer coupled with an electronic signal amplification, conditioning, and display unit. The transducer may be in a detachable probe with or without a disposable cover.

• Cotton & Rayon Dressings

• Cotton, Rayon Supplies

• Diaphoretic Monitoring Electrodes

• Digital Thermometers

• Discrete Photometric Chemistry Analyzer (FDA Code: JJE / 862.2160) A discrete photometric chemistry analyzer for clinical use is a device intended to duplicate manual analytical procedures by performing automatically various steps such as pipetting, preparing filtrates, heating, and measuring color intensity. This device is intended for use in conjunction with certain materials to measure a variety of analytes. Different models of the device incorporate various instrumentation such as micro analysis apparatus, double beam, single, or dual channel photometers, and bichromatic 2-wavelength photometers. Some models of the device may include reagent-containing components that may also serve as reaction units.