A-Spine Asia, Co., Ltd

Click Here To EMAIL INQUIRY
Contact: Ted Shi
Web: http://www.aspine.com.tw
E-Mail:
Address: 2f-1., No. 298, Rueiguang Road, Neihu District, Taipei 114, Taiwan
Phone: +886-(2)-26272977 | Fax: +886-(2)-66065955 | Map/Directions >>

Profile: A-Spine Asia, Co., Ltd specializes in producing orthopedic products. Our products include vesselplasty, tri-fix system, vertebral disc spacers and USB plate systems. Our TriFix G system is ideal for short procedures up to three and four levels. We use a range of rods, plates, blocks, extensions, crosslinks, and connectors for the stabilization of a variety of anatomical configurations. Our Narrow Plate system provides anterior stabilization and fixation for unstable thoracic vertebrae. It is made from titanium alloy, and used in the thoracic regions of the spine. The design resists pullout and pulloff by virtue of triangulation of screw to plate. Mating threads in the round holes and the neck of self-locking screws constrain screw placement to 90° angle of plate to screw.

3 Products/Services (Click for related suppliers)

• Spinal Intervertebral Body Fixation Appliance (FDA Code: KWQ / 888.3060)

A spinal intervertebral body fixation orthosis is a device intended to be implanted made of titanium. It consists of various vertebral plates that are punched into each of a series of vertebral bodies. An eye-type screw is inserted in a hole in the center of each of the plates. A braided cable is threaded through each eye-type screw. The cable is tightened with a tension device and it is fastened or crimped at each eye-type screw. The device is used to apply force to a series of vertebrae to correct "sway back," scoliosis (lateral curvature of the spine), or other conditions.

• Spinal Pedicle Fixation Orthosis (FDA Code: MNI / 888.3070)

Pedicle screw spinal systems are multiple component devices, made from a variety of materials, including alloys such as 316L stainless steel, 316LVM stainless steel, 22Cr-13Ni-5Mn stainless steel, Ti-6Al-4V, and unalloyed titanium, that allow the surgeon to build an implant system to fit the patient's anatomical and physiological requirements. Such a spinal implant assembly consists of a combination of anchors (e.g., bolts, hooks, and/or screws); interconnection mechanisms incorporating nuts, screws, sleeves, or bolts; longitudinal members (e.g., plates, rods, and/or plate/rod combinations); and/or transverse connectors.

• Spondylolisthesis Spinal Fixation Orthosis (FDA Code: MNH / 888.3070)