Profile: Acute Innovations LLC specializes in the medical device field by providing product solutions to thoracic surgeons.Our bioresorbable bone fracture plate is designed to provide stabilization for fractures and osteotomies during thoracotomy procedures,or as supplemental fixation for chest wall injuries. We have designed a comprehensive system of implants and instruments specifically for repairing rib fractures. Our rib fracture plating system is designed to provide stable fixation that is minimally invasive for acute fractures, non-unions and osteotomies of the rib.We treat rib fractures conservatively using pain management and/or bracing techniques. Some patients with severe fractures, or non-unions, could benefit from a minimally invasive procedure.
FDA Registration Number: 3005670412
15 Products/Services (Click for related suppliers)
|
• Bone Fixation Plate (FDA Code: HRS / 888.3030) Single/multiple component metallic bone fixation appliances and accessories are devices intended to be implanted consisting of one or more metallic components and their metallic fasteners. The devices contain a plate, a nail/plate combination, or a blade/plate combination that are made of alloys, such as cobalt-chromium-molybdenum, stainless steel, and titanium, that are intended to be held in position with fasteners, such as screws and nails, or bolts, nuts, and washers. These devices are used for fixation of fractures of the proximal or distal end of long bones, such as intracapsular, intertrochanteric, intercervical, supracondylar, or condylar fractures of the femur; for fusion of a joint; or for surgical procedures that involve cutting a bone. The devices may be implanted or attached through the skin so that a pulling force (traction) may be applied to the skeletal system. |
• Bone Fixation Screw (FDA Code: HWC / 888.3040) A smooth or threaded metallic bone fixation fastener is a device intended to be implanted that consists of a stiff wire segment or rod made of alloys, such as cobalt-chromium-molybdenum and stainless steel, and that may be smooth on the outside, fully or partially threaded, straight or U-shaped; and may be either blunt pointed, sharp pointed, or have a formed, slotted head on the end. It may be used for fixation of bone fractures, for bone reconstructions, as a guide pin for insertion of other implants, or it may be implanted through the skin so that a pulling force (traction) may be applied to the skeletal system. |
• Bone Fracture Plates |
• Fixation Cerclage (FDA Code: JDQ / 888.3010) A bone fixation cerclage is a device intended to be implanted that is made of alloys, such as cobalt-chromium-molybdenum, and that consists of a metallic ribbon or flat sheet or a wire. The device is wrapped around the shaft of a long bone, anchored to the bone with wire or screws, and used in the fixation of fractures. |
• Humeral (hemi-shoulder) Metallic Uncemented Prosthesis (FDA Code: HSD / 888.3690) A shoulder joint humeral (hemi-shoulder) metallic uncemented prosthesis is a device made of alloys, such as cobalt-chromium-molybdenum. It has an intramedullary stem and is intended to be implanted to replace the articular surface of the proximal end of the humerus and to be fixed without bone cement (888.3027). This device is not intended for biological fixation. |
• Intramedullary Fixation Rod and Accessories (FDA Code: HSB / 888.3020) An intramedullary fixation rod is a device intended to be implanted that consists of a rod made of alloys such as cobalt-chromium-molybdenum and stainless steel. It is inserted into the medullary (bone marrow) canal of long bones for the fixation of fractures. |
• Invasive Traction Component (FDA Code: JEC / 888.3040) |
• Non-Powered Traction Apparatus (FDA Code: HST / 888.5850) A nonpowered orthopedic traction apparatus is a device that consists of a rigid frame with nonpowered traction accessories, such as cords, pulleys, or weights, and that is intended to apply a therapeutic pulling force to the skeletal system. |
• Orthopedic Surgical Dc-Powered Motor and Accessory/Attachment (FDA Code: KIJ / 878.4820) |
• Plating Systems |
• Polymer Radial Hemi- Elbow Prosthesis (FDA Code: KWI / 888.3170) An elbow joint radial (hemi-elbow) polymer prosthesis is a device intended to be implanted made of medical grade silicone elastomer used to replace the proximal end of the radius. |
• Smooth Fixation Pin (FDA Code: HTY / 888.3040) |
• Soft Tissue Non-Biodegradable Fixation Fastener (FDA Code: MBI / 888.3040) |
• Surgical Wire (FDA Code: LRN / 888.3030) |
• Threaded Fixation Pin (FDA Code: JDW / 888.3040) |