Advanced Medical Technologies Ag

Click Here To EMAIL INQUIRY
Contact: J Webb
Web: http://www.amt-ag.de
E-Mail:
Address: Kasteler Strasse 11, Nonnweiler-Braunshausen 66620, Germany
Phone: +49-(6873)-6688-0 | Fax: +49-(6873)-6688-66 | Map/Directions >>

Profile: Advanced Medical Technologies Ag deals with ART-system, fast flap system, MBCP, shell cage and wave system. Our ART-system places polyaxial pedicle screws in different lengths and diameters at human disposal. Our flap system is designed for neurosurgery. Our loop-cage offers a patented cage-axis with the loop hinge, and the implantation angle of the cage can be adopted in each phase. We provide MBCP that allows a fast liquid diffusion reaction to the tricalcium phosphate, which is included in the bone graft substitute.

8 Products/Services (Click for related suppliers)

• Cervical Intervertebral Fusion Device With Bone Graft (FDA Code: ODP / 888.3080)

• Lumbar Intervertebral Fusion Device with Bone Graft (FDA Code: MAX / 888.3080)

• Neurosurgery Instruments

• Orthopedic Manual Surgical Instrument (FDA Code: LXH / 888.4540)

An orthopedic manual surgical instrument is a nonpowered hand-held device intended for medical purposes to manipulate tissue, or for use with other devices in orthopedic surgery. This generic type of device includes the cerclage applier, awl, bender, drill brace, broach, burr, corkscrew, countersink, pin crimper, wire cutter, prosthesis driver, extractor, file, fork, needle holder, impactor, bending or contouring instrument, compression instrument, passer, socket positioner, probe, femoral neck punch, socket pusher, reamer, rongeur, scissors, screwdriver, bone skid, staple driver, bone screw starter, surgical stripper, tamp, bone tap, trephine, wire twister, and wrench.

• Spinal Interlaminal Fixation Appliance (FDA Code: KWP / 888.3050)

A spinal interlaminal fixation orthosis is a device intended to be implanted made of an alloy, such as stainless steel, that consists of various hooks and a posteriorly placed compression or distraction rod. The device is implanted, usually across three adjacent vertebrae, to straighten and immobilize the spine to allow bone grafts to unite and fuse the vertebrae together. The device is used primarily in the treatment of scoliosis (a lateral curvature of the spine), but it also may be used in the treatment of fracture or dislocation of the spine, grades 3 and 4 of spondylolisthesis (a dislocation of the spinal column), and lower back syndrome.

• Spinal Intervertebral Body Fixation Appliance (FDA Code: KWQ / 888.3060)

A spinal intervertebral body fixation orthosis is a device intended to be implanted made of titanium. It consists of various vertebral plates that are punched into each of a series of vertebral bodies. An eye-type screw is inserted in a hole in the center of each of the plates. A braided cable is threaded through each eye-type screw. The cable is tightened with a tension device and it is fastened or crimped at each eye-type screw. The device is used to apply force to a series of vertebrae to correct "sway back," scoliosis (lateral curvature of the spine), or other conditions.

• Spinal Pedicle Fixation Orthosis (FDA Code: MNI / 888.3070)

Pedicle screw spinal systems are multiple component devices, made from a variety of materials, including alloys such as 316L stainless steel, 316LVM stainless steel, 22Cr-13Ni-5Mn stainless steel, Ti-6Al-4V, and unalloyed titanium, that allow the surgeon to build an implant system to fit the patient's anatomical and physiological requirements. Such a spinal implant assembly consists of a combination of anchors (e.g., bolts, hooks, and/or screws); interconnection mechanisms incorporating nuts, screws, sleeves, or bolts; longitudinal members (e.g., plates, rods, and/or plate/rod combinations); and/or transverse connectors.

• Spondylolisthesis Spinal Fixation Orthosis (FDA Code: MNH / 888.3070)