Profile: Biomet, Inc designs and manufactures products for hip replacement, knee replacement, shoulder replacement, elbow replacement & other small joint replacements. We are an ISO 9001 CE certified company. We offer products like joint replacement, sports medicine & dental implants. We encourage you to talk to your doctor about options that could help you get back to living and keep you active. If you have suffered from a sports related or other injury, we can help. Sports knee injuries and the available treatment options is the first step to making an informed decision about your healthcare and your quality of life. Our recommendation is to see an orthopedic physician who, after an examination, can give you the appropriate treatment options for your medical condition. Our Repicci II® implant system resurfaces only the damaged section of cartilage, thus saving a healthy cartilage. Our BioSymMetRic™ PIP fixator is a device that uses pins placed through the finger bone to stabilize complex finger fractures.

The company was founded in 1977, has revenues of > USD 1 Billion, has ~20 employees and is ISO 9001, CE certified. NASDAQ:BMET (SEC Filings)

FDA Registration Number: 1825034

51 to 100 of 628 Products/Services (Click for related suppliers)  Page: 1 [2] 3 4 5 6 7 8 9 10 11 12 13

• Bending/Contouring Instrument (FDA Code: HXP / 888.4540) An orthopedic manual surgical instrument is a nonpowered hand-held device intended for medical purposes to manipulate tissue, or for use with other devices in orthopedic surgery. This generic type of device includes the cerclage applier, awl, bender, drill brace, broach, burr, corkscrew, countersink, pin crimper, wire cutter, prosthesis driver, extractor, file, fork, needle holder, impactor, bending or contouring instrument, compression instrument, passer, socket positioner, probe, femoral neck punch, socket pusher, reamer, rongeur, scissors, screwdriver, bone skid, staple driver, bone screw starter, surgical stripper, tamp, bone tap, trephine, wire twister, and wrench.

• Bio Absorbable Suture Anchors

• Bioreabsorbable Bone Cement

• Blades

• Blood Bank Supplies (FDA Code: KSS / 864.9050) Blood bank supplies are general purpose devices intended for in vitro use in blood banking. This generic type of device includes products such as blood bank pipettes, blood grouping slides, blood typing tubes, blood typing racks, and cold packs for antisera reagents. The device does not include articles that are licensed by the Center for Biologics Evaluation and Research of the Food and Drug Administration.

• Blood Pressure Cuff Barriers

• Blood Pressure Cuff With Inflation Systems

• Blood pressure Cuffs (FDA Code: DXQ / 870.1120) A blood pressure cuff is a device that has an inflatable bladder in an inelastic sleeve (cuff) with a mechanism for inflating and deflating the bladder. The cuff is used in conjunction with another device to determine a subject's blood pressure.

• Blood Pressure Cuffs and Neoprene Bladders (1-Tube)

• Blood Pressure Cuffs and Neoprene Bladders (2-Tube)

• Blood Pressure Cuffs With Bayonet Connectors

• Blood Pressure Cuffs With Locking-Type Connectors

• Blood Pressure Cuffs With Luer Lock Connectors

• Blood Pressure Cuffs With Screw-Type Connectors

• Body Production, Back Support Standard

• Bone Cement (FDA Code: LOD / 888.3027) Polymethylmethacrylate (PMMA) bone cement is a device intended to be implanted that is made from methylmethacrylate, polymethylmethacrylate, esters of methacrylic acid, or copolymers containing polymethylmethacrylate and polystyrene. The device is intended for use in arthroplastic procedures of the hip, knee, and other joints for the fixation of polymer or metallic prosthetic implants to living bone.

• Bone Cement Mixing Systems

• Bone Cement Radiopacifier

• Bone Cement Removal Devices

• Bone Cement Restrictor

• Bone Clamp (FDA Code: HXD / 878.4800) A manual surgical instrument for general use is a nonpowered, hand-held, or hand-manipulated device, either reusable or disposable, intended to be used in various general surgical procedures. The device includes the applicator, clip applier, biopsy brush, manual dermabrasion brush, scrub brush, cannula, ligature carrier, chisel, clamp, contractor, curette, cutter, dissector, elevator, skin graft expander, file, forceps, gouge, instrument guide, needle guide, hammer, hemostat, amputation hook, ligature passing and knot-tying instrument, knife, blood lancet, mallet, disposable or reusable aspiration and injection needle, disposable or reusable suturing needle, osteotome, pliers, rasp, retainer, retractor, saw, scalpel blade, scalpel handle, one-piece scalpel, snare, spatula, stapler, disposable or reusable stripper, stylet, suturing apparatus for the stomach and intestine, measuring tape, and calipers. A surgical instrument that has specialized uses in a specific medical specialty is classified in separate regulations in parts 868 through 892.

• Bone Drill And Guide Forceps

• Bone Drills

• Bone Drills

• Bone Fixation Nail (FDA Code: JDS / 888.3030) Single/multiple component metallic bone fixation appliances and accessories are devices intended to be implanted consisting of one or more metallic components and their metallic fasteners. The devices contain a plate, a nail/plate combination, or a blade/plate combination that are made of alloys, such as cobalt-chromium-molybdenum, stainless steel, and titanium, that are intended to be held in position with fasteners, such as screws and nails, or bolts, nuts, and washers. These devices are used for fixation of fractures of the proximal or distal end of long bones, such as intracapsular, intertrochanteric, intercervical, supracondylar, or condylar fractures of the femur; for fusion of a joint; or for surgical procedures that involve cutting a bone. The devices may be implanted or attached through the skin so that a pulling force (traction) may be applied to the skeletal system.

• Bone Fixation Plate (FDA Code: HRS / 888.3030)

• Bone Fixation Screw (FDA Code: HWC / 888.3040) A smooth or threaded metallic bone fixation fastener is a device intended to be implanted that consists of a stiff wire segment or rod made of alloys, such as cobalt-chromium-molybdenum and stainless steel, and that may be smooth on the outside, fully or partially threaded, straight or U-shaped; and may be either blunt pointed, sharp pointed, or have a formed, slotted head on the end. It may be used for fixation of bone fractures, for bone reconstructions, as a guide pin for insertion of other implants, or it may be implanted through the skin so that a pulling force (traction) may be applied to the skeletal system.

• Bone Fixation Staple (FDA Code: JDR / 888.3030)

• Bone Growth Stimulators

• Bone Mallet Solid Stainless Head

• Bone Mallets (FDA Code: HXL / 878.4800)

• Bone Morpheogenic Protein (bmp)

• Bone Rasps (FDA Code: HTR / 878.4800)

• Bone Skid (FDA Code: HWO / 888.4540)

• Bone Taps (FDA Code: HWX / 888.4540)

• Bone Trephine (FDA Code: HWK / 888.4540)

• Bone Tunneling System

• Braces & Orthoses

• Broach (FDA Code: HTQ / 888.4540)

• Brushite Bone Cement

• Calcium Compound Bone Void Filler (FDA Code: MQV / 888.3045) A resorbable calcium salt bone void filler device is a resorbable implant intended to fill bony voids or gaps of the extremities, spine, and pelvis that are caused by trauma or surgery and are not intrinsic to the stability of the bony structure.

• Calcium Phosphate Bone Cements

• Calicum-Phosphate Non-Porous Metal/Polymer Uncemented Semi-Constrained Hip Prosthesis (FDA Code: MEH / 888.3353) A hip joint metal/ceramic/polymer semi-constrained cemented or nonporous uncemented prosthesis is a device intended to be implanted to replace a hip joint. This device limits translation and rotation in one or more planes via the geometry of its articulating surfaces. It has no linkage across-the-joint. The two-part femoral component consists of a femoral stem made of alloys to be fixed in the intramedullary canal of the femur by impaction with or without use of bone cement. The proximal end of the femoral stem is tapered with a surface that ensures positive locking with the spherical ceramic (aluminium oxide, A1203) head of the femoral component. The acetabular component is made of ultra-high molecular weight polyethylene or ultra-high molecular weight polyethylene reinforced with nonporous metal alloys, and used with or without bone cement.

• Calipers (FDA Code: KTZ / 888.4150) A caliper for clinical use is a compass-like device intended for use in measuring the thickness or diameter of a part of the body or the distance between two body surfaces, such as for measuring an excised skeletal specimen to determine the proper replacement size of a prosthesis.

• Camera Systems, Monitors

• Cannulated Drill Bit

• Cannulated Interference Screws

• Carbon Rail System

• Carpal Lunate Wrist Prosthesis (FDA Code: KWN / 888.3750) A wrist joint carpal lunate prosthesis is a one-piece device made of silicone elastomer intended to be implanted to replace the carpal lunate bone of the wrist.

• Carpal Scaphoid Wrist Prosthesis (FDA Code: KWO / 888.3760) A wrist joint carpal scaphoid polymer prosthesis is a one-piece device made of silicone elastomer intended to be implanted to replace the carpal scaphoid bone of the wrist.