Bomimed Inc.

Click Here To EMAIL INQUIRY
Contact: David Douglas Catto
Web: http://www.bomimed.com
E-Mail:
Address: 96 Terracon Pl., Winnipeg, Manitoba R2J 4G7, Canada
Phone: +1-(204)-633 2664 | Fax: +1-(204)-877 435 6984 | Map/Directions >>

Profile: Bomimed Inc. manufactures & distributes anesthesia, critical care and warming therapy products. Maxtec blender buddy securely attaches to the blender using a specific independent block to ensure that it doesn't swivel or move inadvertently. Reusable bags can be cleaned by pasteurization or autoclave. Transparent open cuff silicone masks enable proper visualization. The Joey baby bed™ is an infant care bed created specifcally to complement the modern neonatal unit & with a simple ergonomic design. It decreases the risk of workplace related injury & increases ease of patient care. Leoni plus is suitable for the long term ventilation of premature infants, neonates and children up to 30Kg in weight. Maxtec SpO2 sensors are compatible with oximeter systems and modules.

The company was founded in 1985.

FDA Registration Number: 3003213883
US Agent: Jerry Doane / Tobias Systems, Llc
Phone: +1-(716)-775-0533 E-Mail:

14 Products/Services (Click for related suppliers)

• Anesthesiology Oropharyngeal Airway (FDA Code: CAE / 868.5110)

An oropharyngeal airway is a device inserted into a patient's pharynx through the mouth to provide a patent airway.

• Anesthetic Gas Mask (FDA Code: BSJ / 868.5550)

An anesthetic gas mask is a device, usually made of conductive rubber, that is positioned over a patient's nose or mouth to direct anesthetic gases to the upper airway.

• Breathing Circuit Bacterial Filter (FDA Code: CAH / 868.5260)

A breathing circuit bacterial filter is a device that is intended to remove microbiological and particulate matter from the gases in the breathing circuit.

• Endoscopic Bite Blocks (FDA Code: MNK / 876.1500)

An endoscope and accessories is a device used to provide access, illumination, and allow observation or manipulation of body cavities, hollow organs, and canals. The device consists of various rigid or flexible instruments that are inserted into body spaces and may include an optical system for conveying an image to the user's eye and their accessories may assist in gaining access or increase the versatility and augment the capabilities of the devices. Examples of devices that are within this generic type of device include cleaning accessories for endoscopes, photographic accessories for endoscopes, nonpowered anoscopes, binolcular attachments for endoscopes, pocket battery boxes, flexible or rigid choledochoscopes, colonoscopes, diagnostic cystoscopes, cystourethroscopes, enteroscopes, esophagogastroduodenoscopes, rigid esophagoscopes, fiberoptic illuminators for endoscopes, incandescent endoscope lamps, biliary pancreatoscopes, proctoscopes, resectoscopes, nephroscopes, sigmoidoscopes, ureteroscopes, urethroscopes, endomagnetic retrievers, cytology brushes for endoscopes, and lubricating jelly for transurethral surgical instruments. This section does not apply to endoscopes that have specialized uses in other medical specialty areas and that are covered by classification regulations in other parts of the device classification regulations.

• Extension Airway Connector (FDA Code: BZA / 868.5810)

An airway connector is a device intended to connect a breathing gas source to a tracheal tube, tracheostomy tube, or mask.

• Heat and Moisture Condenser (FDA Code: BYD / 868.5375)

A heat and moisture condenser (artificial nose) is a device intended to be positioned over a tracheotomy (a surgically created opening in the throat) or tracheal tube (a tube inserted into the trachea) to warm and humidify gases breathed in by a patient.

• Pediatric Hospital Bed (FDA Code: FMS / 880.5140)

A pediatric hospital bed is a device intended for medical purposes that consists of a bed or crib designed for the use of a pediatric patient, with fixed end rails and movable and latchable side rails. The contour of the bed surface may be adjustable.

• Reservoir Bag (FDA Code: BTC / 868.5320)

A reservoir bag is a device, usually made of conductive rubber, intended for use in a breathing circuit as a reservoir for breathing gas and to assist, control, or monitor a patient's ventilation.

• Rigid Laryngoscope (FDA Code: CCW / 868.5540)

A rigid laryngoscope is a device used to examine and visualize a patient's upper airway and aid placement of a tracheal tube.

• Temperature Regulated Water Mattress (FDA Code: FOH / 880.5560)

A temperature regulated water mattress is a device intended for medical purposes that consists of a mattress of suitable size, filled with water which can be heated or in some cases cooled. The device includes electrical heating and water circulating components, and an optional cooling component. The temperature control may be manual or automatic.

• Tracheal Tube Stylet (FDA Code: BSR / 868.5790)

A tracheal tube stylet is a device used temporarily to make rigid a flexible tracheal tube to aid its insertion into a patient.

• Tube Introduction Forceps (FDA Code: BWB / 868.5780)

Tube introduction forceps (e.g., Magill forceps) are a right-angled device used to grasp a tracheal tube and place it in a patient's trachea.

• Ventilator Tubing and Support Set (FDA Code: BZO / 868.5975)

Ventilator tubing is a device intended for use as a conduit for gases between a ventilator and a patient during ventilation of the patient.

• Y Piece Breathing Circuit (FDA Code: CAI / 868.5240)

An anesthesia breathing circuit is a device that is intended to administer medical gases to a patient during anesthesia. It provides both an inhalation and exhalation route and may include a connector, adaptor, and Y-piece.