Grand Flush Enterprise Co., Ltd.

Contact: Jen Ke-Min
Address: No. 6, Lane 149, Sec. 2, De-Hua St., Taipei 10375, Taiwan
Phone: +886-(3)-5208829 | Map/Directions >>

Profile: Grand Flush Enterprise Co., Ltd. offers heat & moisture condenser, catheter accessories and breathing circuits with bacterial filter.

5 Products/Services (Click for related suppliers)

• Breathing Circuit Bacterial Filter (FDA Code: CAH / 868.5260)

A breathing circuit bacterial filter is a device that is intended to remove microbiological and particulate matter from the gases in the breathing circuit.

• Catheter Accessories (FDA Code: KGZ / 878.4200)

An introduction/drainage catheter is a device that is a flexible single or multilumen tube intended to be used to introduce nondrug fluids into body cavities other than blood vessels, drain fluids from body cavities, or evaluate certain physiologic conditions. Examples include irrigation and drainage catheters, pediatric catheters, peritoneal catheters (including dialysis), and other general surgical catheters. An introduction/drainage catheter accessory is intended to aid in the manipulation of or insertion of the device into the body. Examples of accessories include adaptors, connectors, and catheter needles.

• Heat and Moisture Condenser (FDA Code: BYD / 868.5375)

A heat and moisture condenser (artificial nose) is a device intended to be positioned over a tracheotomy (a surgically created opening in the throat) or tracheal tube (a tube inserted into the trachea) to warm and humidify gases breathed in by a patient.

• Non-Direct Patient Interface Humidifier (FDA Code: KFZ / 868.5460)

A therapeutic humidifier for home use is a device that adds water vapor to breathing gases and that is intended for respiratory therapy or other medical purposes. The vapor produced by the device pervades the area surrounding the patient, who breathes the vapor during normal respiration.

• Y Piece Breathing Circuit (FDA Code: CAI / 868.5240)

An anesthesia breathing circuit is a device that is intended to administer medical gases to a patient during anesthesia. It provides both an inhalation and exhalation route and may include a connector, adaptor, and Y-piece.