Intersurgical Uab

Contact: John Robinson
Address: 60/28-1, Arnioniu, Pabrade LT-4710, Lithuania | Map/Directions >>

Profile: Intersurgical Uab provides oxygen masks, extension airway connectors and direct patient interface nebulizers.

FDA Registration Number: 3001313714
US Agent: Silvia G. Morales Cruz / Intersurgical, Inc.
Phone: +1-(315)-451-2900 Fax: +1-(315)-451-3696 E-Mail:

18 Products/Services (Click for related suppliers)

• Anesthesiology Oropharyngeal Airway (FDA Code: CAE / 868.5110)

An oropharyngeal airway is a device inserted into a patient's pharynx through the mouth to provide a patent airway.

• Breathing Circuit Bacterial Filter (FDA Code: CAH / 868.5260)

A breathing circuit bacterial filter is a device that is intended to remove microbiological and particulate matter from the gases in the breathing circuit.

• Breathing Mouthpiece (FDA Code: BYP / 868.5620)

A breathing mouthpiece is a rigid device that is inserted into a patient's mouth and that connects with diagnostic or therapeutic respiratory devices.

• Breathing System with/without Controller (FDA Code: BZE / 868.5270)

A breathing system heater is a device that is intended to warm breathing gases before they enter a patient's airway. The device may include a temperature controller.

• Direct Patient Interface Nebulizer (FDA Code: CAF / 868.5630)

A nebulizer is a device intended to spray liquids in aerosol form into gases that are delivered directly to the patient for breathing. Heated, ultrasonic, gas, venturi, and refillable nebulizers are included in this generic type of device.

• Direct Patient Interface Respiratory Gas Humidifier (FDA Code: BTT / 868.5450)

A respiratory gas humidifier is a device that is intended to add moisture to, and sometimes to warm, the breathing gases for administration to a patient. Cascade, gas, heated, and prefilled humidifiers are included in this generic type of device.

• Extension Airway Connector (FDA Code: BZA / 868.5810)

An airway connector is a device intended to connect a breathing gas source to a tracheal tube, tracheostomy tube, or mask.

• Heat and Moisture Condenser (FDA Code: BYD / 868.5375)

A heat and moisture condenser (artificial nose) is a device intended to be positioned over a tracheotomy (a surgically created opening in the throat) or tracheal tube (a tube inserted into the trachea) to warm and humidify gases breathed in by a patient.

• Non-Rebreathing Oxygen Mask (FDA Code: KGB / 868.5570)

A nonrebreathing mask is a device fitting over a patient's face to administer oxygen. It utilizes one-way valves to prevent the patient from rebreathing previously exhaled gases.

• Non-Rebreathing Valve (FDA Code: CBP / 868.5870)

A nonrebreathing valve is a one-way valve that directs breathing gas flow to the patient and vents exhaled gases into the atmosphere.

• Non-Ventilatory Medicinal Nebulizer/Atomizer (FDA Code: CCQ / 868.5640)

A medicinal nonventilatory nebulizer (atomizer) is a device that is intended to spray liquid medication in aerosol form into the air that a patient will breathe.

• Oxygen Masks (FDA Code: BYG / 868.5580)

An oxygen mask is a device placed over a patient's nose, mouth, or tracheostomy to administer oxygen or aerosols.

• Oxygen Nasal Cannula (FDA Code: CAT / 868.5340)

A nasal oxygen cannula is a two-pronged device used to administer oxygen to a patient through both nostrils.

• Pressure Tubing and Accessories (FDA Code: BYX / 868.5860)

Pressure tubing and accessories are flexible or rigid devices intended to deliver pressurized medical gases.

• Tee Drain/Water Trap (FDA Code: BYH / 868.5995)

A tee drain (water trap) is a device intended to trap and drain water that collects in ventilator tubing during respiratory therapy, thereby preventing an increase in breathing resistance.

• Ventilator Tubing and Support Set (FDA Code: BZO / 868.5975)

Ventilator tubing is a device intended for use as a conduit for gases between a ventilator and a patient during ventilation of the patient.

• Venturi Low Concentration Oxygen Mask (FDA Code: BYF / 868.5600)

A venturi mask is a device containing an air-oxygen mixing mechanism that dilutes 100 percent oxygen to a predetermined concentration and delivers the mixed gases to a patient.

• Y Piece Breathing Circuit (FDA Code: CAI / 868.5240)

An anesthesia breathing circuit is a device that is intended to administer medical gases to a patient during anesthesia. It provides both an inhalation and exhalation route and may include a connector, adaptor, and Y-piece.