Japan Medical Materials Corporation, Shiga Gamo Pl

Contact: Hiroko Tanioka
Address: 10-1 Kawai-Cho, Higashiomi 529-1595, Japan
Phone: +81-(663)-501036 | Map/Directions >>

Profile: Japan Medical Materials Corporation, Shiga Gamo Pl provides polymer, metal and ceramic hip prosthesis.

FDA Registration Number: 3006536454
US Agent: Robert J. Slomoff
Phone: +1-(301)-983-1707 Fax: +1-(301)-983-2746 E-Mail:

3 Products/Services (Click for related suppliers)

• Cardiopulmonary Bypass Pump Speed Controller (FDA Code: DWA / 870.4380)

A cardiopulmonary bypass pump speed control is a device used that incorporates an electrical system or a mechanical system, or both, and is used to control the speed of blood pumps used in cardiopulmonary bypass surgery.

• Non-Roller Type Cardiopulmonary Bypass Blood Pump (FDA Code: KFM / 870.4360)

A nonroller-type cardiopulmonary bypass blood pump is a device that uses a method other than revolving rollers to pump the blood through the cardiopulmonary bypass circuit during bypass surgery.

• Uncemented, Cemented Or Non-Porous Metal/Ceramic/Polymer Semi-Constrained Hip Prosthesis (FDA Code: LZO / 888.3353)

A hip joint metal/ceramic/polymer semi-constrained cemented or nonporous uncemented prosthesis is a device intended to be implanted to replace a hip joint. This device limits translation and rotation in one or more planes via the geometry of its articulating surfaces. It has no linkage across-the-joint. The two-part femoral component consists of a femoral stem made of alloys to be fixed in the intramedullary canal of the femur by impaction with or without use of bone cement. The proximal end of the femoral stem is tapered with a surface that ensures positive locking with the spherical ceramic (aluminium oxide, A1203) head of the femoral component. The acetabular component is made of ultra-high molecular weight polyethylene or ultra-high molecular weight polyethylene reinforced with nonporous metal alloys, and used with or without bone cement.