Jemo Spine, LLC

Click Here To EMAIL INQUIRY
Contact: Mr. Dong Myung Jeon - President
Web: http://www.jemospine.com
E-Mail:
Address: 6170 South 380 West, Suite 200, Murray, Utah 84107, USA
Phone: +1-(801)-266-4811 | Fax: +1-(801)-266-4363 | Map/Directions >>

Profile: Jemo Spine, LLC specializes in spinal fusion system. Our Delta™ spinal fusion system employs proprietary technological advancements in poly-axial screw design which aids the surgeon’s placement of the screw, ease of construct installation and positive surgical outcome. Our ALTA™ anterior cervical plate is an anatomically designed, low profile cervical plating system available in multiple sizes to accommodate different cervical structure requirements. It is manufactured from medical grade titanium alloy and provides static stabilization. It is designed to allow the use of traditional surgical techniques as well as standard instrumentation.

9 Products/Services (Click for related suppliers)

• Anterior Cervical Plate

• Dynamic Decompression and Stabilization Systems

• Flexible Rod Systems

• Interspinous Decompression Decompression Devices

• Spinal Fusion Systems

• Spinal Intervertebral Body Fixation Appliance (FDA Code: KWQ / 888.3060)

A spinal intervertebral body fixation orthosis is a device intended to be implanted made of titanium. It consists of various vertebral plates that are punched into each of a series of vertebral bodies. An eye-type screw is inserted in a hole in the center of each of the plates. A braided cable is threaded through each eye-type screw. The cable is tightened with a tension device and it is fastened or crimped at each eye-type screw. The device is used to apply force to a series of vertebrae to correct "sway back," scoliosis (lateral curvature of the spine), or other conditions.

• Spinal Pedicle Fixation Orthosis (FDA Code: MNI / 888.3070)

Pedicle screw spinal systems are multiple component devices, made from a variety of materials, including alloys such as 316L stainless steel, 316LVM stainless steel, 22Cr-13Ni-5Mn stainless steel, Ti-6Al-4V, and unalloyed titanium, that allow the surgeon to build an implant system to fit the patient's anatomical and physiological requirements. Such a spinal implant assembly consists of a combination of anchors (e.g., bolts, hooks, and/or screws); interconnection mechanisms incorporating nuts, screws, sleeves, or bolts; longitudinal members (e.g., plates, rods, and/or plate/rod combinations); and/or transverse connectors.

• Spondylolisthesis Spinal Fixation Orthosis (FDA Code: MNH / 888.3070)

• Synthetic Bone Substitute