Kawasumi Laboratories, Inc.

Address: 3-28-15 Minami Ohi, Shinagawa-ku, Tokyo 140-0013, Japan
Phone: +81-(03)-3763-1151 | Fax: +81-(03)-3763-1315 | Map/Directions >>

Profile: Kawasumi Laboratories, Inc. has introduced two new gravity IV administration sets for the ambulatory surgery market. Our IV-026N is a 10-drop gravity set and is 120 inches long. Our IV-027N is a vented 20-drop, 107 inch set that has two needleless Y-sites.

FDA Registration Number: 1000163068
US Agent: Ronald D.arkin / Arkin Consulting Group, Llc
Phone: +1-(770)-565-6166 Fax: +1-(678)-894-8320 E-Mail:

25 Products/Services (Click for related suppliers)

• Anesthetic Infusion Pump (FDA Code: FRN / 880.5725)

An infusion pump is a device used in a health care facility to pump fluids into a patient in a controlled manner. The device may use a piston pump, a roller pump, or a peristaltic pump and may be powered electrically or mechanically. The device may also operate using a constant force to propel the fluid through a narrow tube which determines the flow rate. The device may include means to detect a fault condition, such as air in, or blockage of, the infusion line and to activate an alarm.

• Anti-Regurgitation Valve with Blood Tubing Set (FDA Code: FJK / 876.5820)

A hemodialysis system and accessories is a device that is used as an artificial kidney system for the treatment of patients with renal failure or toxemic conditions and that consists of an extracorporeal blood system, a conventional dialyzer, a dialysate delivery system, and accessories. Blood from a patient flows through the tubing of the extracorporeal blood system and accessories to the blood compartment of the dialyzer, then returns through further tubing of the extracorporeal blood system to the patient. The dialyzer has two compartments that are separated by a semipermeable membrane. While the blood is in the blood compartment, undesirable substances in the blood pass through the semipermeable membrane into the dialysate in the dialysate compartment. The dialysate delivery system controls and monitors the dialysate circulating through the dialysate compartment of the dialyzer.

• Blood Transfer Unit (FDA Code: KSB / 864.9875)

A transfer set is a device intended for medical purposes that consists of a piece of tubing with suitable adaptors used to transfer blood or plasma from one container to another.

• Central Multiple Patient Dialysate Delivery System (FDA Code: FKQ / 876.5820)

• Dialysis Catheters

• Dialysis System

• Dialysis Units

• Fistula Needle (FDA Code: FIE / 876.5540)

A blood access device and accessories is a device intended to provide access to a patient's blood for hemodialysis or other chronic uses. When used in hemodialysis, it is part of an artificial kidney system for the treatment of patients with renal failure or toxemic conditions and provides access to a patient's blood for hemodialysis. The device includes implanted blood access devices, nonimplanted blood access devices, and accessories for both the implanted and nonimplanted blood access devices.

• Fluorescence and Microscopy Filters

• Hemodialysis Blood Circuit Accessories (FDA Code: KOC / 876.5820)

• I.V. Container (FDA Code: KPE / 880.5025)

An I.V. container is a container made of plastic or glass used to hold a fluid mixture to be administered to a patient through an intravascular administration set.

• I.V. Fluid Transfer Unit (FDA Code: LHI / 880.5440)

An intravascular administration set is a device used to administer fluids from a container to a patient's vascular system through a needle or catheter inserted into a vein. The device may include the needle or catheter, tubing, a flow regulator, a drip chamber, an infusion line filter, an I.V. set stopcock, fluid delivery tubing, connectors between parts of the set, a side tube with a cap to serve as an injection site, and a hollow spike to penetrate and connect the tubing to an I.V. bag or other infusion fluid container.

• Implanted Subcutaneous Intravascular Port & Catheter (FDA Code: LJT / 880.5965)

A subcutaneous, implanted, intravascular infusion port and catheter is a device that consists of a subcutaneous, implanted reservoir that connects to a long-term intravascular catheter. The device allows for repeated access to the vascular system for the infusion of fluids and medications and the sampling of blood. The device consists of a portal body with a resealable septum and outlet made of metal, plastic, or combination of these materials and a long-term intravascular catheter is either preattached to the port or attached to the port at the time of device placement. The device is available in various profiles and sizes and can be of a single or multiple lumen design.

• Intravenous Administration Kit (FDA Code: FPA / 880.5440)

• Laboratory Vacuum Line Protection Filters

• Operating Microscope Filters

• Operating Microscope Filters, Fixed filters

• Operating Microscope Filters, Two-position filter

• Peristaltic Infusion Pump (FDA Code: FRN / 880.5725)

• Red Filters for Dyschromatopsia

• Removal of Low Density Lipoprotein (FDA Code: MMY)

• Short-Term Less Than 30 Days Therapeutic Intravascular Catheter (FDA Code: FOZ / 880.5200)

An intravascular catheter is a device that consists of a slender tube and any necessary connecting fittings and that is inserted into the patient's vascular system for short term use (less than 30 days) to sample blood, monitor blood pressure, or administer fluids intravenously. The device may be constructed of metal, rubber, plastic, or a combination of these materials.

• Single Lumen Hypodermic Needle (FDA Code: FMI / 880.5570)

A hypodermic single lumen needle is a device intended to inject fluids into, or withdraw fluids from, parts of the body below the surface of the skin. The device consists of a metal tube that is sharpened at one end and at the other end joined to a female connector (hub) designed to mate with a male connector (nozzle) of a piston syringe or an intravascular administration set.

• UV Germicidal Lamps Filters

• Vacuum Line Protection Filters