Korea Bone Bank Co., Ltd.

Click Here To EMAIL INQUIRY
Contact: Kwang Il Lee
Web: http://www.kbbcom.co.kr
E-Mail:
Address: No. 402 Acetechnotower 9th. 345-30, Gasandong Geumcheongu, Seoul 153-782, Korea, Republic Of
Phone: +82-(2)-21040475 | Fax: +82-(2)-21040478 | Map/Directions >>

Profile: Korea Bone Bank Co., Ltd. is engaged in the production of spinal implant, orthopedic, orthobiology and dental reconstructive implant products. Our spinal implant products include EOS/OPS, CTL spinal fixation system and MA graft lumbar cage system. We supply cervical thoracic lumbar system that offers solution for rigid posterior fixation of occipito-cervico-thoracic region of spine. Our MA graft lumbar cage system is designed to fit space to deficit site and hydration evenly by vacuum packaging cause dispersion of load to cage, and offer patients comfort. Our orthopedic products include Buechel-Pappes™ tricompartmental knee system, Buechel-Pappes™ total shoulder system and Hoffman-Pappas TMJ replacement system. We provide dental bone powder that includes cortical, cortical cancellous and cancellous bone powder. Our Allograft comprises of hard tissue bone shaft, wedge or ring and chip & cube and soft tissue meniscus, Achilles tendon, BTB and tibialis tendon.

26 Products/Services (Click for related suppliers)

• Allograft Bone Graft

• Allografts

• Bone Allografts

• Bone Screws

• Cement Dispenser (FDA Code: KIH / 888.4200)

A cement dispenser is a nonpowered syringe-like device intended for use in placing bone cement (888.3027) into surgical sites.

• Cemented Metal/Polymer Semi-Constrained Hip Prosthesis (FDA Code: JDI / 888.3350)

A hip joint metal/polymer semi-constrained cemented prosthesis is a device intended to be implanted to replace a hip joint. The device limits translation and rotation in one or more planes via the geometry of its articulating surfaces. It has no linkage across-the-joint. This generic type of device includes prostheses that have a femoral component made of alloys, such as cobalt-chromium-molybdenum, and an acetabular resurfacing component made of ultra-high molecular weight polyethylene and is limited to those prostheses intended for use with bone cement (888.3027).

• Clamps

• Dental Implants

• Femoral Metal Ball Hemi Hip Prosthesis (FDA Code: LZY / 888.3360)

A hip joint femoral (hemi-hip) metallic cemented or uncemented prosthesis is a device intended to be implanted to replace a portion of the hip joint. This generic type of device includes prostheses that have a femoral component made of alloys, such as cobalt-chromium-molybdenum. This generic type of device includes designs which are intended to be fixed to the bone with bone cement (888.3027) as well as designs which have large window-like holes in the stem of the device and which are intended for use without bone cement. However, in these latter designs, fixation of the device is not achieved by means of bone ingrowth.

• Fixation Pins

• Humeral (hemi-shoulder) Metallic Uncemented Prosthesis (FDA Code: HSD / 888.3690)

A shoulder joint humeral (hemi-shoulder) metallic uncemented prosthesis is a device made of alloys, such as cobalt-chromium-molybdenum. It has an intramedullary stem and is intended to be implanted to replace the articular surface of the proximal end of the humerus and to be fixed without bone cement (888.3027). This device is not intended for biological fixation.

• Humeral Shoulder Prosthesis (FDA Code: MJT)

• Impactor (FDA Code: HWA / 888.4540)

An orthopedic manual surgical instrument is a nonpowered hand-held device intended for medical purposes to manipulate tissue, or for use with other devices in orthopedic surgery. This generic type of device includes the cerclage applier, awl, bender, drill brace, broach, burr, corkscrew, countersink, pin crimper, wire cutter, prosthesis driver, extractor, file, fork, needle holder, impactor, bending or contouring instrument, compression instrument, passer, socket positioner, probe, femoral neck punch, socket pusher, reamer, rongeur, scissors, screwdriver, bone skid, staple driver, bone screw starter, surgical stripper, tamp, bone tap, trephine, wire twister, and wrench.

• Metal Femoral Hemi- Hip Prosthesis (FDA Code: KWL / 888.3360)

• Metal/Polymer Cemented Non-Constrained Shoulder Prosthesis (FDA Code: KWT / 888.3650)

A shoulder joint metal/polymer non-constrained cemented prosthesis is a device intended to be implanted to replace a shoulder joint. The device limits minimally (less than normal anatomic constraints) translation in one or more planes. It has no linkage across-the-joint. This generic type of device includes prostheses that have a humeral component made of alloys, such as cobalt-chromium-molybdenum, and a glenoid resurfacing component made of ultra-high molecular weight polyethylene, and is limited to those prostheses intended for use with bone cement (888.3027).

• Metal/Polymer Cemented Semi-Constrained Shoulder Prosthesis (FDA Code: KWS / 888.3660)

A shoulder joint metal/polymer semi-constrained cemented prosthesis is a device intended to be implanted to replace a shoulder joint. The device limits translation and rotation in one or more planes via the geometry of its articulating surfaces. It has no linkage across-the-joint. This generic type of device includes prostheses that have a humeral resurfacing component made of alloys, such as cobalt-chromium-molybdenum, and a glenoid resurfacing component made of ultra-high molecular weight polyethylene, and is limited to those prostheses intended for use with bone cement (888.3027).

• Metal/Polymer Semi-Constrained Hip Prosthesis (FDA Code: LPH / 888.3358)

A hip joint metal/polymer/metal semi-constrained porous-coated uncemented prosthesis is a device intended to be implanted to replace a hip joint. The device limits translation and rotation in one or more planes via the geometry of its articulating surfaces. It has no linkage across the joint. This generic type of device has a femoral component made of a cobalt-chromium-molybdenum (Co-Cr-Mo) alloy or a titanium-aluminum-vanadium (Ti-6Al-4V) alloy and an acetabular component composed of an ultra-high molecular weight polyethylene articulating bearing surface fixed in a metal shell made of Co-Cr-Mo or Ti-6Al-4V. The femoral stem and acetabular shell have a porous coating made of, in the case of Co-Cr-Mo substrates, beads of the same alloy, and in the case of Ti-6Al-4V substrates, fibers of commercially pure titanium or Ti-6Al-4V alloy. The porous coating has a volume porosity between 30 and 70 percent, an average pore size between 100 and 1,000 microns, interconnecting porosity, and a porous coating thickness between 500 and 1,500 microns. The generic type of device has a design to achieve biological fixation to bone without the use of bone cement.

• Modular Spinal Fixation System

• Orthopedic Devices

• Orthopedic Implant Devices

• Orthopedic Implant Devices for Prosthetic Joint Replacement

• Orthopedic Manual Surgical Instrument (FDA Code: LXH / 888.4540)

• Semi-Constrained Patellofemorotibial Knee Prosthesis (FDA Code: JWH / 888.3560)

A knee joint patellofemorotibial polymer/metal/polymer semi-constrained cemented prosthesis is a device intended to be implanted to replace a knee joint. The device limits translation and rotation in one or more planes via the geometry of its articulating surfaces. It has no linkage across-the-joint. This generic type of device includes prostheses that have a femoral component made of alloys, such as cobalt-chromium-molybdenum, and a tibial component or components and a retropatellar resurfacing component made of ultra-high molecular weight polyethylene. This generic type of device is limited to those prostheses intended for use with bone cement (888.3027).

• Spinal Implants

• Spinal Pedicle Fixation Orthosis (FDA Code: MNI / 888.3070)

Pedicle screw spinal systems are multiple component devices, made from a variety of materials, including alloys such as 316L stainless steel, 316LVM stainless steel, 22Cr-13Ni-5Mn stainless steel, Ti-6Al-4V, and unalloyed titanium, that allow the surgeon to build an implant system to fit the patient's anatomical and physiological requirements. Such a spinal implant assembly consists of a combination of anchors (e.g., bolts, hooks, and/or screws); interconnection mechanisms incorporating nuts, screws, sleeves, or bolts; longitudinal members (e.g., plates, rods, and/or plate/rod combinations); and/or transverse connectors.

• Spondylolisthesis Spinal Fixation Orthosis (FDA Code: MNH / 888.3070)