Medical Industries America Inc.

Click Here To EMAIL INQUIRY
Contact: Marilyn Bird - VP
E-Mail:
Address: 2636 289th Place, Adel, Iowa 50003, USA
Phone: +1-(515)-993-5001, 800-759-3038 | Fax: +1-(515)-993-4172 | Map/Directions >>

Profile: Medical Industries America Inc. manufactures medical respiratory equipments. Our products include compressors, nebulizers & CPAPS powered air purifying respirator system or accessories, masks, respirators, gas masks and protective films.

The company was founded in 1987, has revenues of USD 5-10 Million, has ~40 employees and is ISO 9001 certified.

20 Products/Services (Click for related suppliers)

• AC-Powered Portable Ward Use Suction Apparatus (FDA Code: JCX / 878.4780)

A powered suction pump is a portable, AC-powered or compressed air-powered device intended to be used to remove infectious materials from wounds or fluids from a patient's airway or respiratory support system. The device may be used during surgery in the operating room or at the patient's bedside. The device may include a microbial filter.

• Aerosol Generator

• Direct Patient Interface Nebulizer (FDA Code: CAF / 868.5630)

A nebulizer is a device intended to spray liquids in aerosol form into gases that are delivered directly to the patient for breathing. Heated, ultrasonic, gas, venturi, and refillable nebulizers are included in this generic type of device.

• Direct Patient Interface Respiratory Gas Humidifier (FDA Code: BTT / 868.5450)

A respiratory gas humidifier is a device that is intended to add moisture to, and sometimes to warm, the breathing gases for administration to a patient. Cascade, gas, heated, and prefilled humidifiers are included in this generic type of device.

• Electrical Nebulizer Pump (FDA Code: JPW / 874.5220)

An ear, nose, and throat drug administration device is one of a group of ear, nose, and throat devices intended specifically to administer medicinal substances to treat ear, nose, and throat disorders. These instruments include the powder blower, dropper, ear wick, manual nebulizer pump, and nasal inhaler.

• Manual/Powered Portable Aspiration Pump (FDA Code: BTA / 878.4780)

• Middle Ear Inflation Device (FDA Code: MJV)

• Non-Continuous Ventilator/Respirator (FDA Code: BZD / 868.5905)

A noncontinuous ventilator (intermittent positive pressure breathing-IPPB) is a device intended to deliver intermittently an aerosol to a patient's lungs or to assist a patient's breathing.

• Non-Powered Portable Single Patient Suction Apparatus (FDA Code: GCY / 878.4680)

A nonpowered, single patient, portable suction apparatus is a device that consists of a manually operated plastic, disposable evacuation system intended to provide a vacuum for suction drainage of surgical wounds.

• Non-Ventilatory Medicinal Nebulizer/Atomizer (FDA Code: CCQ / 868.5640)

A medicinal nonventilatory nebulizer (atomizer) is a device that is intended to spray liquid medication in aerosol form into the air that a patient will breathe.

• Oximeters (FDA Code: DQA / 870.2700)

An oximeter is a device used to transmit radiation at a known wavelength(s) through blood and to measure the blood oxygen saturation based on the amount of reflected or scattered radiation. It may be used alone or in conjunction with a fiberoptic oximeter catheter.

• Oxygen Conserver (FDA Code: NFB / 868.5905)

• Oxygen Masks (FDA Code: BYG / 868.5580)

An oxygen mask is a device placed over a patient's nose, mouth, or tracheostomy to administer oxygen or aerosols.

• Portable Air Compressor (FDA Code: BTI / 868.6250)

A portable air compressor is a device intended to provide compressed air for medical purposes, e.g., to drive ventilators and other respiratory devices.

• Portable Liquid Oxygen Unit (FDA Code: BYJ / 868.5655)

A portable liquid oxygen unit is a portable, thermally insulated container of liquid oxygen that is intended to supplement gases to be inhaled by a patient, is sometimes accompanied by tubing and an oxygen mask. An empty portable liquid oxygen unit is a device, while the oxygen contained therein is a drug.

• Portable Oxygen Generator (FDA Code: CAW / 868.5440)

A portable oxygen generator is a device that is intended to release oxygen for respiratory therapy by means of either a chemical reaction or physical means (e.g., a molecular sieve).

• Powered Heating Pad (FDA Code: IRT / 890.5740)

A powered heating pad is an electrical device intended for medical purposes that provides dry heat therapy for body surfaces. It is capable of maintaining an elevated temperature during use.

• Spirometry Peak Flow Meter (FDA Code: BZH / 868.1860)

A peak-flow meter for spirometry is a device used to measure a patient's maximum ventilatory flow rate.

• Vacuum Collection Bottle (FDA Code: KDQ / 880.6740)

A vacuum-powered body fluid suction apparatus is a device used to aspirate, remove, or sample body fluids. The device is powered by an external source of vacuum. This generic type of device includes vacuum regulators, vacuum collection bottles, suction catheters and tips, connecting flexible aspirating tubes, rigid suction tips, specimen traps, noninvasive tubing, and suction regulators (with gauge).

• Ventilatory Effort Recorder (FDA Code: MNR / 868.2375)

A breathing (ventilatory) frequency monitor is a device intended to measure or monitor a patient's respiratory rate. The device may provide an audible or visible alarm when the respiratory rate, averaged over time, is outside operator settable alarm limits. This device does not include the apnea monitor classified in 868.2377.