Medical Technology Products, Inc.
Contact: Thomas J. Hartnett III III - Regulatory Affairs Engineer
Web: http://www.medtechproducts.com
E-Mail:
Address: 2221-16 5th Avenue, Ronkonkoma, New York 11779, USA
Phone: +1-(631)-285-6640 | Fax: +1-(631)-285-6641 | Map/Directions >>
Profile: Medical Technology Products, Inc. is involved in the design, development, and manufacturing of intravenous infusion pumps. We manufacture the MTP® transport infusion pump and custom infusion pumps for clinical use. Our MVP-1 model 1000 infusion pump is designed to satisfy the requirement of simplified home infusion pump operation. It allows the patient undergoing intravenous therapy reasonable mobility, and uncomplicated set up and operation. In addition, the MVP-1 pump has been successfully tested for the infusion of blood and blood products. These MVP-1 infusion pumps may also be customized to satisfy the special requirements for laboratory and animal research.
The company was founded in 1982, has revenues of USD 1-5 Million. OTC:MTPX (SEC Filings)
FDA Registration Number: 2244732
20 Products/Services (Click for related suppliers)
|
| • Adult-Pediatric Volumetric Infusion Pumps |
| • Ambulatory Infusion Pumps |
| • Anesthesia Infusion Pump Tubing |
| • Anesthetic Infusion Pump (FDA Code: FRN / 880.5725) An infusion pump is a device used in a health care facility to pump fluids into a patient in a controlled manner. The device may use a piston pump, a roller pump, or a peristaltic pump and may be powered electrically or mechanically. The device may also operate using a constant force to propel the fluid through a narrow tube which determines the flow rate. The device may include means to detect a fault condition, such as air in, or blockage of, the infusion line and to activate an alarm. |
| • Batteries & Battery Assemblies for Infusion Pumps |
| • Constant-flow Infusion Pump |
| • Infusion Pump Service Parts |
| • Infusion Pump Stands |
| • Infusion Pumps, Ambulatory Pumps |
| • Intravenous Administration Kit (FDA Code: FPA / 880.5440) An intravascular administration set is a device used to administer fluids from a container to a patient's vascular system through a needle or catheter inserted into a vein. The device may include the needle or catheter, tubing, a flow regulator, a drip chamber, an infusion line filter, an I.V. set stopcock, fluid delivery tubing, connectors between parts of the set, a side tube with a cap to serve as an injection site, and a hollow spike to penetrate and connect the tubing to an I.V. bag or other infusion fluid container. |
| • IV Medication Delivery Systems, volumetric infusion pumps |
| • IV Stand Accessories, Multi-Infusion Pump |
| • MRI Infusion Pump Systems, Infusion System Accessories |
| • PCA Pumps, Infusion Pump |
| • Peristaltic Infusion Pump (FDA Code: FRN / 880.5725) |
| • Product Development, Hand-held Infusion Pump Controller |
| • Product Development, Infusion Pumps |
| • Syringe Infusion Pump |
| • Transport Infusion Pumps |
| • Volumetric Infusion Pumps |
