Skype

Medisize

Click Here To EMAIL INQUIRY
Contact: D. van Rinkhuyzen - Director of Marketing
Web: http://www.medisize.com
E-Mail:
Address: Robert Huberin tie 3A, Vantaa 01511, Finland
Phone: +358-(13)-268 4000 | Fax: +358-(9)-5629 1130 | Map/Directions >>
 
 

Profile: Medisize specializes in product design, in-house tool making, molding, welding, assembly, packaging and sterilization. We produce medical and pharmaceutical components, flexible containers, subassemblies & finished devices. We develop and manufacture a wide variety of medical & diagnostic devices. We are a solution provider for the healthcare market. We can handle complex projects and combine our technical and manufacturing expertise to create versatile customized solutions. Our medical and diagnostic devices include pumps, tube sets/tube systems, catheters, contrast media/high pressure injection, surgical devices, transfer devices, diagnostic arrays, special closures, wound care products, blisters, cassette solutions, implants and radiation shield. Our ranges of manufacturing technologies include injection molding, insert molding, silicon molding/liquid injection molding, bonding and sterilization.

The company has ~380 employees and is ISO 9001, CE certified.

FDA Registration Number: 3002598726
US Agent: Ashley Motamedi / Flexicare Inc
Phone: +1-(949)-450-9999  E-Mail:

14 Products/Services (Click for related suppliers)  
• Anesthetic Infusion Pump (FDA Code: FRN / 880.5725)
An infusion pump is a device used in a health care facility to pump fluids into a patient in a controlled manner. The device may use a piston pump, a roller pump, or a peristaltic pump and may be powered electrically or mechanically. The device may also operate using a constant force to propel the fluid through a narrow tube which determines the flow rate. The device may include means to detect a fault condition, such as air in, or blockage of, the infusion line and to activate an alarm.
• Breathing Circuit Bacterial Filter (FDA Code: CAH / 868.5260)
A breathing circuit bacterial filter is a device that is intended to remove microbiological and particulate matter from the gases in the breathing circuit.
• Catheters
• Closed Loop Drug Administration Pump
• Contract Manufacturing
• Direct Patient Interface Respiratory Gas Humidifier (FDA Code: BTT / 868.5450)
A respiratory gas humidifier is a device that is intended to add moisture to, and sometimes to warm, the breathing gases for administration to a patient. Cascade, gas, heated, and prefilled humidifiers are included in this generic type of device.
• Extension Airway Connector (FDA Code: BZA / 868.5810)
An airway connector is a device intended to connect a breathing gas source to a tracheal tube, tracheostomy tube, or mask.
• Heat and Moisture Condenser (FDA Code: BYD / 868.5375)
A heat and moisture condenser (artificial nose) is a device intended to be positioned over a tracheotomy (a surgically created opening in the throat) or tracheal tube (a tube inserted into the trachea) to warm and humidify gases breathed in by a patient.
• Nasal Inhaler (FDA Code: KCO / 874.5220)
An ear, nose, and throat drug administration device is one of a group of ear, nose, and throat devices intended specifically to administer medicinal substances to treat ear, nose, and throat disorders. These instruments include the powder blower, dropper, ear wick, manual nebulizer pump, and nasal inhaler.
• Oxygen Therapy Products
• Packings
• Peristaltic Infusion Pump (FDA Code: FRN / 880.5725)
• Safety Syringes
• Y Piece Breathing Circuit (FDA Code: CAI / 868.5240)
An anesthesia breathing circuit is a device that is intended to administer medical gases to a patient during anesthesia. It provides both an inhalation and exhalation route and may include a connector, adaptor, and Y-piece.

 Edit or Enhance this Company (153 potential buyers viewed listing,  27 forwarded to manufacturer's website)
Browse Category   |   Alphabetical Products   |   ALL 25,000 Suppliers
HomeBuyAdd FREE ListingAdvertise Medical CompanyMedical Portal