Paramount Surgicals, Inc.

Click Here To EMAIL INQUIRY
Web: http://paramountsurgicals.com
E-Mail:
Address: 942 Wildrose Lane, Suite B, Brownsville, Texas 78520, USA
Phone: +1-(956)-541-1220, 877-486-4629 | Fax: +1-(956)-544-6090, 541-2070 | Map/Directions >>

Profile: Paramount Surgicals, Inc. designs, manufactures and distributes spinal implants & instruments. We offer custom products and instruments. Our product line includes Unimax™ lumbar pedicle screw system for the low-back, Radix™ & Simplex™ cervical plating systems for the neck. Our Unimax™ pedicle screw and plate system is a rectangular construct that follows the biomechanical principles of the normal spine. Our Radix™ system comprises of cervical plates of varying lengths for multilevel cervical instrumentation and screws with bulb like head that can roll inside a collar.

FDA Registration Number: 3006404019

9 Products/Services (Click for related suppliers)

• Cervical Fixation Systems

• Cervical Instrumentation Screws

• Cervical Plates

• Lumbar Intervertebral Disk Stabilizations

• Pedicle Plate Systems

• Pedicle Screw System

• Spinal Intervertebral Body Fixation Appliance (FDA Code: KWQ / 888.3060)

A spinal intervertebral body fixation orthosis is a device intended to be implanted made of titanium. It consists of various vertebral plates that are punched into each of a series of vertebral bodies. An eye-type screw is inserted in a hole in the center of each of the plates. A braided cable is threaded through each eye-type screw. The cable is tightened with a tension device and it is fastened or crimped at each eye-type screw. The device is used to apply force to a series of vertebrae to correct "sway back," scoliosis (lateral curvature of the spine), or other conditions.

• Spinal Pedicle Fixation Orthosis (FDA Code: MNI / 888.3070)

Pedicle screw spinal systems are multiple component devices, made from a variety of materials, including alloys such as 316L stainless steel, 316LVM stainless steel, 22Cr-13Ni-5Mn stainless steel, Ti-6Al-4V, and unalloyed titanium, that allow the surgeon to build an implant system to fit the patient's anatomical and physiological requirements. Such a spinal implant assembly consists of a combination of anchors (e.g., bolts, hooks, and/or screws); interconnection mechanisms incorporating nuts, screws, sleeves, or bolts; longitudinal members (e.g., plates, rods, and/or plate/rod combinations); and/or transverse connectors.

• Spondylolisthesis Spinal Fixation Orthosis (FDA Code: MNH / 888.3070)