Plaxtron Industrial (M) Sdn. Bhd.

Contact: Jay Wang
Address: Plot 28, Kawasan Perusahaan, Jelapang 2, Ftz, Ipoh, Perak 30020, Malaysia
Phone: +60-(5)-5268899 | Fax: +60-(5)-5264582 | Map/Directions >>

Profile: Plaxtron Industrial (M) Sdn. Bhd. manufactures nose clips, nylon washers, laryngeal mask airways, manual resuscitators, mask re-breathing adaptors, nasopharyngeal airways, pumps, nebulizers, tooth protectors and wrenches.

FDA Registration Number: 8044169
US Agent: Sindy Ning / Kintop International L.l.c
Phone: +1-(312)-550-9002 E-Mail:

23 Products/Services (Click for related suppliers)

• Airway Pressure Monitor (FDA Code: CAP / 868.2600)

An airway pressure monitor is a device used to measure the pressure in a patient's upper airway. The device may include a pressure gauge and an alarm.

• Airway Pressure Monitor with Alarm (FDA Code: CAP / 868.2600)

• Airway Pressure Monitor with Gauge (FDA Code: CAP / 868.2600)

• Anesthesiology Oropharyngeal Airway (FDA Code: CAE / 868.5110)

An oropharyngeal airway is a device inserted into a patient's pharynx through the mouth to provide a patent airway.

• Anesthetic Gas Mask (FDA Code: BSJ / 868.5550)

An anesthetic gas mask is a device, usually made of conductive rubber, that is positioned over a patient's nose or mouth to direct anesthetic gases to the upper airway.

• Breathing Circuit Bacterial Filter (FDA Code: CAH / 868.5260)

A breathing circuit bacterial filter is a device that is intended to remove microbiological and particulate matter from the gases in the breathing circuit.

• Dental Protector (FDA Code: BRW / 868.5820)

A dental protector is a device intended to protect a patient's teeth during manipulative procedures within a patient's oral cavity.

• Direct Patient Interface Nebulizer (FDA Code: CAF / 868.5630)

A nebulizer is a device intended to spray liquids in aerosol form into gases that are delivered directly to the patient for breathing. Heated, ultrasonic, gas, venturi, and refillable nebulizers are included in this generic type of device.

• Extension Airway Connector (FDA Code: BZA / 868.5810)

An airway connector is a device intended to connect a breathing gas source to a tracheal tube, tracheostomy tube, or mask.

• Gaseous Phase Carbon-Dioxide Gas Analyzer (FDA Code: CCK / 868.1400)

A carbon dioxide gas analyzer is a device intended to measure the concentration of carbon dioxide in a gas mixture to aid in determining the patient's ventilatory, circulatory, and metabolic status. The device may use techniques such as chemical titration, absorption of infrared radiation, gas chromatography, or mass spectrometry.

• Inspiratory Airway Pressure Meter (FDA Code: BXR / 868.1780)

An inspiratory airway pressure meter is a device used to measure the amount of pressure produced in a patient's airway during maximal inspiration.

• Manual Emergency Ventilator/Resuscitator (FDA Code: BTM / 868.5915)

A manual emergency ventilator is a device, usually incorporating a bag and valve, intended to provide emergency respiratory support by means of a face mask or a tube inserted into a patient's airway.

• Nasopharyngeal Airways (FDA Code: BTQ / 868.5100)

A nasopharyngeal airway is a device used to aid breathing by means of a tube inserted into a patient's pharynx through the nose to provide a patent airway.

• Non Self-Inflating Manual Resuscitator (FDA Code: NHK / 868.5905)

A noncontinuous ventilator (intermittent positive pressure breathing-IPPB) is a device intended to deliver intermittently an aerosol to a patient's lungs or to assist a patient's breathing.

• Non-Rebreathing Valve (FDA Code: CBP / 868.5870)

A nonrebreathing valve is a one-way valve that directs breathing gas flow to the patient and vents exhaled gases into the atmosphere.

• Non-Ventilatory Medicinal Nebulizer/Atomizer (FDA Code: CCQ / 868.5640)

A medicinal nonventilatory nebulizer (atomizer) is a device that is intended to spray liquid medication in aerosol form into the air that a patient will breathe.

• Nose Clips (FDA Code: BXJ / 868.6225)

A nose clip is a device intended to close a patient's external nares (nostrils) during diagnostic or therapeutic procedures.

• Oxygen Masks (FDA Code: BYG / 868.5580)

An oxygen mask is a device placed over a patient's nose, mouth, or tracheostomy to administer oxygen or aerosols.

• Oxygen Nasal Cannula (FDA Code: CAT / 868.5340)

A nasal oxygen cannula is a two-pronged device used to administer oxygen to a patient through both nostrils.

• Positive End Expiratory Pressure Breathing Attachment (FDA Code: BYE / 868.5965)

A positive end expiratory pressure (PEEP) breathing attachment is a device attached to a ventilator that is used to elevate pressure in a patient's lungs above atmospheric pressure at the end of exhalation.

• Powered Emergency Ventilator/Resuscitator (FDA Code: BTL / 868.5925)

A powered emergency ventilator is a demand valve or inhalator intended to provide emergency respiratory support by means of a face mask or a tube inserted into a patient's airway.

• Pressure Tubing and Accessories (FDA Code: BYX / 868.5860)

Pressure tubing and accessories are flexible or rigid devices intended to deliver pressurized medical gases.

• Tracheal Tube Stylet (FDA Code: BSR / 868.5790)

A tracheal tube stylet is a device used temporarily to make rigid a flexible tracheal tube to aid its insertion into a patient.