Profile: Stryker offers a full range of laparoscopic products that meet the performance needed by surgeons. From the uniform image created by our laparoscopes to our StrykeFlow II suction irrigation system, we deliver laparoscopists with product quality. Our Stryker MIS joint replacement program encompasses multiple MIS surgical techniques, MIS friendly implants, specialized instrumentation, comprehensive on-line and hands-on training & support. Our Simplex P Bone Cement provides a unique formula coupled with proprietary manufacturing. We also offer a full line of Conquest Arthroscopic Manual Instruments including punches, scissors and graspers to perform any arthroscopic surgery procedure and accommodate individual surgeon preferences. Our Bone Plug Cutter uses a circular design to harvest the bone-to-bone autograft with circular bone blocks. Our image-based technology used in spinal surgery utilizes scans of the patient's anatomy and instruments that are tracked by the navigation System's camera.

NYSE:SYK (SEC Filings)

151 to 200 of 347 Products/Services (Click for related suppliers)  Page: 1 2 3 [4] 5 6 7

• Instrument Surgical Light (FDA Code: FSQ / 878.4580) A surgical lamp (including a fixture) is a device intended to be used to provide visible illumination of the surgical field or the patient.

• Insufflators

• Interference Screws

• Intracompartmental Pressure Monitor (FDA Code: LXC)

• Irrigation Catheter (FDA Code: GBX / 878.4200) An introduction/drainage catheter is a device that is a flexible single or multilumen tube intended to be used to introduce nondrug fluids into body cavities other than blood vessels, drain fluids from body cavities, or evaluate certain physiologic conditions. Examples include irrigation and drainage catheters, pediatric catheters, peritoneal catheters (including dialysis), and other general surgical catheters. An introduction/drainage catheter accessory is intended to aid in the manipulation of or insertion of the device into the body. Examples of accessories include adaptors, connectors, and catheter needles.

• IV Catheters & Infusion Sets

• IV Medication Delivery Systems, volumetric infusion pumps

• IV Stand Accessories, Multi-Infusion Pump

• Knee Holders

• Knee Joint Femorotibial Metal/Polymer Non-constrained Cemented Prosthesis (FDA Code: HSX / 888.3520) A knee joint femorotibial metal/polymer non-constrained cemented prosthesis is a device intended to be implanted to replace part of a knee joint. The device limits minimally (less than normal anatomic constraints) translation in one or more planes. It has no linkage across-the-joint. This generic type of device includes prostheses that have a femoral condylar resurfacing component or components made of alloys, such as cobalt-chromium-molybdenum, and a tibial component or components made of ultra-high molecular weight polyethylene and are intended for use with bone cement (888.3027).

• Knee Replacement, Primary Component

• Knee/Ankle Braces & Supports

• Laparoscopic Insufflator (FDA Code: HIF / 884.1730) A laparoscopic insufflator is a device used to facilitate the use of the laparoscope by filling the peritoneal cavity with gas to distend it.

• Large Open Gear Bone Drill

• Lateral Tibial Inserts

• Lavage Systems

• Light Sources

• Light Sources Advanced Light Source

• Light Sources Alternative Light Source

• Light Sources Creative Light Source

• Light Sources Fiber Optic Light Source

• Light Sources Infrared Light Source

• Light Sources IR Light Source

• Light Sources Led Light Source

• Light Sources Microscope Light Source

• Light Sources Ultra Violet Light Source

• Light Sources UV Light Source

• Light Sources White Light Source

• Light Sources Xenon Light Source

• Low Viscosity Bone Cements

• Lumbar Total Disc Replacement

• Manual Obstetrical Table and Accessories (FDA Code: HHP / 884.4900) An obstetric table is a device with adjustable sections designed to support a patient in the various positions required during obstetric and gynecologic procedures. This generic type of device may include the following accessories: patient equipment, support attachments, and cabinets for warming instruments and disposing of wastes.

• Manual Operating Room Table (FDA Code: FSE / 878.4950) A manual operating table and accessories and a manual operating chair and accessories are nonpowered devices, usually with movable components, intended to be used to support a patient during diagnostic examinations or surgical procedures.

• Manual Osteotome (FDA Code: GFI / 878.4800) A manual surgical instrument for general use is a nonpowered, hand-held, or hand-manipulated device, either reusable or disposable, intended to be used in various general surgical procedures. The device includes the applicator, clip applier, biopsy brush, manual dermabrasion brush, scrub brush, cannula, ligature carrier, chisel, clamp, contractor, curette, cutter, dissector, elevator, skin graft expander, file, forceps, gouge, instrument guide, needle guide, hammer, hemostat, amputation hook, ligature passing and knot-tying instrument, knife, blood lancet, mallet, disposable or reusable aspiration and injection needle, disposable or reusable suturing needle, osteotome, pliers, rasp, retainer, retractor, saw, scalpel blade, scalpel handle, one-piece scalpel, snare, spatula, stapler, disposable or reusable stripper, stylet, suturing apparatus for the stomach and intestine, measuring tape, and calipers. A surgical instrument that has specialized uses in a specific medical specialty is classified in separate regulations in parts 868 through 892.

• Manual Patient Rotation Bed (FDA Code: INY / 890.5180) A manual patient rotation bed is a device that turns a patient who is restricted to a reclining position. It is intended for medical purposes to treat or prevent bedsores, to treat severe and extensive burns, or to aid circulation.

• Manual Patient Transfer Device (FDA Code: FMR / 880.6785) A manual patient transfer device is a device consisting of a wheeled stretcher and a mechanism on which a patient can be placed so that the patient can be transferred with minimal disturbance in a horizontal position to the stretcher.

• Manual Retractor

• Manual Surgical Chisel (FDA Code: FZO / 878.4800)

• Manual Wheelchairs

• Mattress Cover (FDA Code: FMW / 880.6190) A mattress cover for medical purposes is a device intended for medical purposes that is used to protect a mattress. It may be electrically conductive or contain a germicide.

• Mechanical Wheelchair (FDA Code: IOR / 890.3850) A mechanical wheelchair is a manually operated device with wheels that is intended for medical purposes to provide mobility to persons restricted to a sitting position.

• Mechanical Wheeled Stretcher

• Medi-Vacr Suction Canister

• Medial Tibial inserts

• Metal Suction Tips

• Metal/Polymer Semi-Constrained Hip Prosthesis (FDA Code: LPH / 888.3358) A hip joint metal/polymer/metal semi-constrained porous-coated uncemented prosthesis is a device intended to be implanted to replace a hip joint. The device limits translation and rotation in one or more planes via the geometry of its articulating surfaces. It has no linkage across the joint. This generic type of device has a femoral component made of a cobalt-chromium-molybdenum (Co-Cr-Mo) alloy or a titanium-aluminum-vanadium (Ti-6Al-4V) alloy and an acetabular component composed of an ultra-high molecular weight polyethylene articulating bearing surface fixed in a metal shell made of Co-Cr-Mo or Ti-6Al-4V. The femoral stem and acetabular shell have a porous coating made of, in the case of Co-Cr-Mo substrates, beads of the same alloy, and in the case of Ti-6Al-4V substrates, fibers of commercially pure titanium or Ti-6Al-4V alloy. The porous coating has a volume porosity between 30 and 70 percent, an average pore size between 100 and 1,000 microns, interconnecting porosity, and a porous coating thickness between 500 and 1,500 microns. The generic type of device has a design to achieve biological fixation to bone without the use of bone cement.

• Micro Bone Cutting Saw

• Micro Wire Driver

• Microscope Television Monitor

• Mini Cystoscopes