Profile: Stryker Canada specializes in the manufacturing of medical devices. We offer products for treating trauma and back pain. We make micro implants and products for interventional pain & joint replacement. Some of our products are hydroset bone substitute, T2 Recon nailing system, dall-miles cable system and proximal humeral nailing system. The T2 proximal humeral nailing system represents a solution for the treatment of up to four-part fractures of the proximal humerus and those with a diaphyseal extension. It has four proximal locking holes in multiple planes that are strategically placed to enable locking separate fragments of the lesser tuberosity, the greater tuberosity, and the humeral head, accommodating 5.0 mm locking screws. The T2 Recon Nail is the latest development for the treatment of proximal hip and diaphyseal femoral fractures. The four-degree lateral bend and R2.0 antecurvature allow for trochanteric insertion in either Recon or antegrade femoral mode.

The company was founded in 1990, has ~3800 employees and is ISO 9001, CE certified. NYSE:SYK (SEC Filings)

FDA Registration Number: 3004024955

101 to 112 of 112 Products/Services (Click for related suppliers)  Page: 1 2 [3]

• Threaded Fixation Pin (FDA Code: JDW / 888.3040) A smooth or threaded metallic bone fixation fastener is a device intended to be implanted that consists of a stiff wire segment or rod made of alloys, such as cobalt-chromium-molybdenum and stainless steel, and that may be smooth on the outside, fully or partially threaded, straight or U-shaped; and may be either blunt pointed, sharp pointed, or have a formed, slotted head on the end. It may be used for fixation of bone fractures, for bone reconstructions, as a guide pin for insertion of other implants, or it may be implanted through the skin so that a pulling force (traction) may be applied to the skeletal system.

• Tibial (hemi-knee) Metallic Resurfacing Uncemented Prosthesis (FDA Code: HSH / 888.3590) A knee joint tibial (hemi-knee) metallic resurfacing uncemented prosthesis is a device intended to be implanted to replace part of a knee joint. The device limits minimally (less than normal anatomic constraints) translation in one or more planes. It has no linkage across-the-joint. This prosthesis is made of alloys, such as cobalt-chromium-molybdenum, and is intended to resurface one tibial condyle. The generic type of device is limited to those prostheses intended for use without bone cement (888.3027).

• Tibial Component Ankle Prosthesis

• Total Knee Prosthesis

• Total Shoulder Prosthesis System

• Trunnion-Bearing Semi-Constrained Femorotibial Knee Prosthesis (FDA Code: LGE / 888.3530) A knee joint femorotibial metal/polymer semi-constrained cemented prosthesis is a device intended to be implanted to replace part of a knee joint. The device limits translation and rotation in one or more planes via the geometry of its articulating surfaces. It has no linkage across-the-joint. This generic type of device includes prostheses that consist of a femoral component made of alloys, such as cobalt-chromium-molybdenum, and a tibial component made of ultra-high molecular weight polyethylene and is limited to those prostheses intended for use with bone cement (888.3027).

• Uncemented Metal/Polymer Semi-Constrained Hip Prosthesis (FDA Code: LWJ / 888.3360) A hip joint femoral (hemi-hip) metallic cemented or uncemented prosthesis is a device intended to be implanted to replace a portion of the hip joint. This generic type of device includes prostheses that have a femoral component made of alloys, such as cobalt-chromium-molybdenum. This generic type of device includes designs which are intended to be fixed to the bone with bone cement (888.3027) as well as designs which have large window-like holes in the stem of the device and which are intended for use without bone cement. However, in these latter designs, fixation of the device is not achieved by means of bone ingrowth.

• Uncemented Patellar Resurfacing Hemi- Knee Prosthesis (FDA Code: HTG / 888.3580) A knee joint patellar (hemi-knee) metallic resurfacing uncemented prosthesis is a device made of alloys, such as cobalt-chromium-molybdenum, intended to be implanted to replace the retropatellar articular surface of the patellofemoral joint. The device limits minimally (less than normal anatomic constraints) translation in one or more planes. It has no linkage across-the-joint. This generic type of device includes prostheses that have a retropatellar resurfacing component and an orthopedic screw to transfix the patellar remnant. This generic type of device is limited to those prostheses intended for use without bone cement (888.3027).

• Upper Femoral Prosthesis (FDA Code: JDD / 888.3360)

• Wire Cutters (FDA Code: HXZ / 888.4540) An orthopedic manual surgical instrument is a nonpowered hand-held device intended for medical purposes to manipulate tissue, or for use with other devices in orthopedic surgery. This generic type of device includes the cerclage applier, awl, bender, drill brace, broach, burr, corkscrew, countersink, pin crimper, wire cutter, prosthesis driver, extractor, file, fork, needle holder, impactor, bending or contouring instrument, compression instrument, passer, socket positioner, probe, femoral neck punch, socket pusher, reamer, rongeur, scissors, screwdriver, bone skid, staple driver, bone screw starter, surgical stripper, tamp, bone tap, trephine, wire twister, and wrench.

• Wire Holding Forceps (FDA Code: HYA / 878.4800) A manual surgical instrument for general use is a nonpowered, hand-held, or hand-manipulated device, either reusable or disposable, intended to be used in various general surgical procedures. The device includes the applicator, clip applier, biopsy brush, manual dermabrasion brush, scrub brush, cannula, ligature carrier, chisel, clamp, contractor, curette, cutter, dissector, elevator, skin graft expander, file, forceps, gouge, instrument guide, needle guide, hammer, hemostat, amputation hook, ligature passing and knot-tying instrument, knife, blood lancet, mallet, disposable or reusable aspiration and injection needle, disposable or reusable suturing needle, osteotome, pliers, rasp, retainer, retractor, saw, scalpel blade, scalpel handle, one-piece scalpel, snare, spatula, stapler, disposable or reusable stripper, stylet, suturing apparatus for the stomach and intestine, measuring tape, and calipers. A surgical instrument that has specialized uses in a specific medical specialty is classified in separate regulations in parts 868 through 892.

• Wrench (FDA Code: HXC / 888.4540)