Thayer Medical Corporation

Click Here To EMAIL INQUIRY
Web: http://www.thayermedical.com
E-Mail:
Address: 4575 South Palo Verde Road, Suite 337, Tucson, Arizona 85714-1961, USA
Phone: +1-(520)-790-5393 | Fax: +1-(520)-790-5854 | Map/Directions >>

Profile: Thayer Medical Corporation produces plastic disposable parts for respiratory use. Our PrimeAire® is a plastic holding chamber, which is designed to improve the delivery of the inhaled drugs. Our Quake® utilizes a unique approach to airway clearance.

FDA Registration Number: 2026894

12 Products/Services (Click for related suppliers)

• Aerosol Therapy, Holding Chambers

• Anesthetic Gas Mask (FDA Code: BSJ / 868.5550)

An anesthetic gas mask is a device, usually made of conductive rubber, that is positioned over a patient's nose or mouth to direct anesthetic gases to the upper airway.

• Breathing Mouthpiece (FDA Code: BYP / 868.5620)

A breathing mouthpiece is a rigid device that is inserted into a patient's mouth and that connects with diagnostic or therapeutic respiratory devices.

• Direct Patient Interface Nebulizer (FDA Code: CAF / 868.5630)

A nebulizer is a device intended to spray liquids in aerosol form into gases that are delivered directly to the patient for breathing. Heated, ultrasonic, gas, venturi, and refillable nebulizers are included in this generic type of device.

• Intraprocedural Equipment, Adapters & Connectors

• Manual Nebulizer Pump (FDA Code: EPN / 874.5220)

An ear, nose, and throat drug administration device is one of a group of ear, nose, and throat devices intended specifically to administer medicinal substances to treat ear, nose, and throat disorders. These instruments include the powder blower, dropper, ear wick, manual nebulizer pump, and nasal inhaler.

• Mucus Clearance Devices

• Powered Electric Percussor (FDA Code: BYI / 868.5665)

A powered percussor is a device that is intended to transmit vibration through a patient's chest wall to aid in freeing mucus deposits in the lung in order to improve bronchial drainage and that may be powered by electricity or compressed gas.

• T-Adapters & Connectors

• Tee Drain/Water Trap (FDA Code: BYH / 868.5995)

A tee drain (water trap) is a device intended to trap and drain water that collects in ventilator tubing during respiratory therapy, thereby preventing an increase in breathing resistance.

• Ventilator Tubing and Support Set (FDA Code: BZO / 868.5975)

Ventilator tubing is a device intended for use as a conduit for gases between a ventilator and a patient during ventilation of the patient.

• Y Piece Breathing Circuit (FDA Code: CAI / 868.5240)

An anesthesia breathing circuit is a device that is intended to administer medical gases to a patient during anesthesia. It provides both an inhalation and exhalation route and may include a connector, adaptor, and Y-piece.