Skype

Vadi Medical Technology Co., Ltd.

Click Here To EMAIL INQUIRY
Contact: Chao-Chih Huang
Web: http://www.vadimedical.com.tw
E-Mail:
Address: 7f-1, No. 492, Sec. 1, Wan Sou Rd., Kuei Shan Hsiang, Taoyuan Hsien 33350, Taiwan
Phone: +886-(2)-8209-2833 | Fax: +886-(2)-8209-7604 | Map/Directions >>
 
 

Profile: Vadi Medical Technology Co., Ltd. specializes in the research, development and production of medical devices & consumables, which are utilized in the domains of respiratory, emergency & critical care. Our medical devices include respiratory humidifier, disposable humidification chamber w/auto-feed system, reusable adult humidification chamber, expiratory filter heater, reusable water trap, disposable bacterial filter, silicone connector, insulation inspiratory heater and disposable neonatal humidification chamber. Our VH-2000 humidifier is used along with ventilator in the ICU or respiratory home care unit. The purpose is to add humidity and warm the gas in the patient's breathing circuit. The humidification chamber is with adequate distilled water. The warm moisture gas is supplied by a chamber which is heated by the humidifier. The heater plate on the humidifier is controlled to a constant temperature which is determined by the setting of the heater power. Our G- 314003-P disposable adult humidification chamber is available with an inlet and outlet diameter of 22mm ,respectively. The whole set of bacteria filter heater contains a heater, a bacteria filter, a water trap, a 5-cm silicone connector, and a mounting bracket. The bacteria filter heater is installed at the expiratory limb of breathing circuit which is connected to the ventilator. The water trap which is just below the filter is used for the collection of condensed water inside the breathing circuit. The 5-cm silicone connector is to join the water trap and filter together.

The company is ISO 9001 & 13485, CE 0434, UL certified.

FDA Registration Number: 9616445
US Agent: Shu-chen Cheng / Roc Chinese-european Industrial Research Society
Phone: +1-(614)-588-8168  E-Mail:

13 Products/Services (Click for related suppliers)  
• Anesthetic Gas Mask (FDA Code: BSJ / 868.5550)
An anesthetic gas mask is a device, usually made of conductive rubber, that is positioned over a patient's nose or mouth to direct anesthetic gases to the upper airway.
• Breathing Mouthpiece (FDA Code: BYP / 868.5620)
A breathing mouthpiece is a rigid device that is inserted into a patient's mouth and that connects with diagnostic or therapeutic respiratory devices.
• Gas Mask Head Strap (FDA Code: BTK / 868.5560)
A gas mask head strap is a device used to hold an anesthetic gas mask in position on a patient's face.
• Manual Emergency Ventilator/Resuscitator (FDA Code: BTM / 868.5915)
A manual emergency ventilator is a device, usually incorporating a bag and valve, intended to provide emergency respiratory support by means of a face mask or a tube inserted into a patient's airway.
• Oxygen Masks (FDA Code: BYG / 868.5580)
An oxygen mask is a device placed over a patient's nose, mouth, or tracheostomy to administer oxygen or aerosols.
• Oxygen Nasal Cannula (FDA Code: CAT / 868.5340)
A nasal oxygen cannula is a two-pronged device used to administer oxygen to a patient through both nostrils.
• Powered Heating Unit (FDA Code: IRQ / 890.5950)
A powered heating unit is a device intended for medical purposes that consists of an encased cabinet containing hot water and that is intended to heat and maintain hot packs at an elevated temperature.
• Reservoir Bag (FDA Code: BTC / 868.5320)
A reservoir bag is a device, usually made of conductive rubber, intended for use in a breathing circuit as a reservoir for breathing gas and to assist, control, or monitor a patient's ventilation.
• Rigid Laryngoscope (FDA Code: CCW / 868.5540)
A rigid laryngoscope is a device used to examine and visualize a patient's upper airway and aid placement of a tracheal tube.
• Tee Drain/Water Trap (FDA Code: BYH / 868.5995)
A tee drain (water trap) is a device intended to trap and drain water that collects in ventilator tubing during respiratory therapy, thereby preventing an increase in breathing resistance.
• Ventilator Tubing and Support Set (FDA Code: BZO / 868.5975)
Ventilator tubing is a device intended for use as a conduit for gases between a ventilator and a patient during ventilation of the patient.
• Venturi Low Concentration Oxygen Mask (FDA Code: BYF / 868.5600)
A venturi mask is a device containing an air-oxygen mixing mechanism that dilutes 100 percent oxygen to a predetermined concentration and delivers the mixed gases to a patient.
• Y Piece Breathing Circuit (FDA Code: CAI / 868.5240)
An anesthesia breathing circuit is a device that is intended to administer medical gases to a patient during anesthesia. It provides both an inhalation and exhalation route and may include a connector, adaptor, and Y-piece.

 Edit or Enhance this Company (1327 potential buyers viewed listing,  109 forwarded to manufacturer's website)
Browse Category   |   Alphabetical Products   |   ALL 25,000 Suppliers
HomeBuyAdd FREE ListingAdvertise Medical CompanyMedical Portal