Ventlab Corporation

Click Here To EMAIL INQUIRY
Web: http://www.ventlab.com
E-Mail:
Address: 155 Boyce Drive, Mocksville, North Carolina 27028, USA
Phone: +1-(336)-753-5000 | Fax: +1-(336)-753-5002 | Map/Directions >>

Profile: Ventlab Corporation designs and manufactures medical devices used in anesthesia, respiratory care, critical care & emergency medical services. Our airflow resuscitation bag is used to increase the protection and safety of staff. It includes bacterial/viral filter on the exhalation port, and an optional inspiratory manometer to improve patient outcomes. Our disposable nasal CPAP interface is used with positive pressure ventilation devices for patients with pulmonary insufficiencies, or breathing that requires positive pressure breathing therapy.

The company was founded in 1993, has revenues of USD 10-25 Million, has ~90 employees and is ISO 9001 certified.

FDA Registration Number: 2246980

26 Products/Services (Click for related suppliers)

• Anesthetic Gas Mask (FDA Code: BSJ / 868.5550)

An anesthetic gas mask is a device, usually made of conductive rubber, that is positioned over a patient's nose or mouth to direct anesthetic gases to the upper airway.

• Breathing Circuit Bacterial Filter (FDA Code: CAH / 868.5260)

A breathing circuit bacterial filter is a device that is intended to remove microbiological and particulate matter from the gases in the breathing circuit.

• Direct Patient Interface Nebulizer (FDA Code: CAF / 868.5630)

A nebulizer is a device intended to spray liquids in aerosol form into gases that are delivered directly to the patient for breathing. Heated, ultrasonic, gas, venturi, and refillable nebulizers are included in this generic type of device.

• Electrosurgical Patient Return Electrode (FDA Code: ODR / 878.4400)

An electrosurgical cutting and coagulation device and accessories is a device intended to remove tissue and control bleeding by use of high-frequency electrical current.

• Face Mask Removers

• Face Masks

• Face Masks & Eye Shield

• Full Face Masks

• Heat and Moisture Condenser (FDA Code: BYD / 868.5375)

A heat and moisture condenser (artificial nose) is a device intended to be positioned over a tracheotomy (a surgically created opening in the throat) or tracheal tube (a tube inserted into the trachea) to warm and humidify gases breathed in by a patient.

• Lumbar Orthosis, Brace (FDA Code: IQE / 890.3490)

A truncal orthosis is a device intended for medical purposes to support or to immobilize fractures, strains, or sprains of the neck or trunk of the body. Examples of truncal orthoses are the following: Abdominal, cervical, cervical-thoracic, lumbar, lumbo-sacral, rib fracture, sacroiliac, and thoracic orthoses and clavicle splints.

• Manual Emergency Ventilator/Resuscitator (FDA Code: BTM / 868.5915)

A manual emergency ventilator is a device, usually incorporating a bag and valve, intended to provide emergency respiratory support by means of a face mask or a tube inserted into a patient's airway.

• Nasal Cannula Systems

• Non Self-Inflating Manual Resuscitator (FDA Code: NHK / 868.5905)

A noncontinuous ventilator (intermittent positive pressure breathing-IPPB) is a device intended to deliver intermittently an aerosol to a patient's lungs or to assist a patient's breathing.

• Non-Continuous Ventilator/Respirator (FDA Code: BZD / 868.5905)

• Oxygen Masks (FDA Code: BYG / 868.5580)

An oxygen mask is a device placed over a patient's nose, mouth, or tracheostomy to administer oxygen or aerosols.

• Oxygen Nasal Cannula (FDA Code: CAT / 868.5340)

A nasal oxygen cannula is a two-pronged device used to administer oxygen to a patient through both nostrils.

• Pediatric Airflow Resuscitators

• Positive End Expiratory Pressure Breathing Attachment (FDA Code: BYE / 868.5965)

A positive end expiratory pressure (PEEP) breathing attachment is a device attached to a ventilator that is used to elevate pressure in a patient's lungs above atmospheric pressure at the end of exhalation.

• Pressure Infusor for I.V. Bags (FDA Code: KZD / 880.5420)

A pressure infusor for an I.V. bag is a device consisting of an inflatable cuff which is placed around an I.V. bag. When the device is inflated, it increases the pressure on the I.V. bag to assist the infusion of the fluid.

• Pressure Tubing and Accessories (FDA Code: BYX / 868.5860)

Pressure tubing and accessories are flexible or rigid devices intended to deliver pressurized medical gases.

• Resuscitators Disposable, Disposable Manual Resuscitation Bags

• Resuscitators Reusable, Reusable Manual Resuscitation Bags

• Small Full Face Mask with Headgear

• Tee Drain/Water Trap (FDA Code: BYH / 868.5995)

A tee drain (water trap) is a device intended to trap and drain water that collects in ventilator tubing during respiratory therapy, thereby preventing an increase in breathing resistance.

• Tracheal Tube with/without Connector (FDA Code: BTR / 868.5730)

A tracheal tube is a device inserted into a patient's trachea via the nose or mouth and used to maintain an open airway.

• Y Piece Breathing Circuit (FDA Code: CAI / 868.5240)

An anesthesia breathing circuit is a device that is intended to administer medical gases to a patient during anesthesia. It provides both an inhalation and exhalation route and may include a connector, adaptor, and Y-piece.