Biochemistry analyzer is designed to perform wide range of biochemical tests. It is usually classified into three categories, namely, the wet type analyzer, the dry type analyzer, and the biosensor. Application of a conventional wet type biochemistry analyzer is to mix a test sample with reagent for chemical reaction, then an optical reading device, such as a calorimeter or a spectrophotometer, is used to read color change before and after the reaction.

Biological Safety Cabinets are primary devices intended to contain and minimize exposure when working with biohazardous materials. These cabinets are designed to protect laboratory personnel against exposure during experimental procedures as well as protect experimental materials from contamination. They are recommended for manipulations of infectious agents that are likely to create aerosols. Biological safety cabinets utilize vertical laminar airflow to achieve a barrier of protection against airborne contaminants such as microorganisms. Biological safety cabinets are the most effective primary containment devices used in laboratories working with infectious agents.

Biopsy punch is a commonly performed diagnostic procedure on abnormal skin growths or skin tumors. It is used for the removal of dermatological samples for biopsy examinations. The biopsy punch is a handled medical tool with a sharp, round cutting surface. A pencil-like instrument is used to remove a small, thin cylinder of tissue.

Identification. A gastroenterology-urology biopsy instrument is a device used to remove, by cutting or aspiration, a specimen of tissue for microscopic examination. This generic type of device includes the biopsy punch, gastrointestinal mechanical biopsy instrument, suction biopsy instrument, gastro-urology biopsy needle and needle set, and nonelectric biopsy forceps. This section does not apply to biopsy instruments that have specialized uses in other medical specialty areas and that are covered by classification regulations in other parts of the device classification regulations.

Classification. (1) Class II (performance standards).

Blood bank refrigerator provides fast pull-down, rapid temperature recovery and superior 4°C temperature uniformity for refrigerated blood. It has two glass doors and is equipped with the alarm/monitor and a 7-day circular chart recorder to meet validation requirements. It has a defrosting automatic, recirculation-air cooling in the interior and a warning system as standard. This warning system is an electronic switching, monitoring and warning device. It alerts the user to operating failure, faults or incorrect operation in good time. These refrigerators with their extra thick insulation made of high-grade, pressure-foamed and pro-environmental material ensure a energy-saving operation.

Blood culture is microbiological culture of blood. It is employed to detect infections that are spreading through the bloodstream. In medicine venipuncture or venepuncture is the process of obtaining a sample of venous blood. Usually a 5 ml to 25 ml sample of blood is adequate depending on what blood tests have been requested. In many circumstances it will be done by a phlebotomist, although nurses, doctors, some EMTs, paramedics, other medical staff and chiropractors are also trained to take blood. Blood is most commonly obtained from the median cubital vein, on the anterior forearm (the side within the fold of the elbow). This vein lies close to the surface of the skin, and there is not a large nerve supply.Minute quantities of blood may be taken by fingersticks sampling and collected from infants by means of a heel stick or from scalp veins with a butterfly needle

Blood gas analyzers are used to measure the PO2, pH, and PCO2 in a blood sample. A separate electrode is used for making each measurement. Many blood gas analyzers are also able to measure the PCO2 and PO2 in a non-liquid, gaseous sample.

Blood Gas Capillary Tubes are used for traditional blood gas analysis and as a transfer device for PKU & POC testing. Blood gas capillary tubes are ideal for analyzers that support tests for multiple analytes in addition to traditional blood gas tests.

Blood glucose meters are devices used to monitor blood glucose in the home or at the bedside in hospital. These meters are used for determining the approximate concentration of glucose in the blood. It is a key element of home blood glucose monitoring (HBGM) by people with diabetes mellitus or with proneness to hypoglycemia. A small drop of blood obtained by pricking the skin with a lancet is placed on a disposable test strip, which the meter reads and uses to calculate the blood glucose level. The meter then displays the level in mg/dl or mmol/l.

Blood Glucose Test Strips provide a convenient and rapid method for estimation of blood glucose. Blood glucose test strips are thin materials upon which a small drop of blood is placed. Blood glucose test strips are placed in a glucose meter so that measurements are taken and blood glucose levels determined.

Blood Glucose Test measures the amount of a sugar called glucose in the blood. It is the main source of energy used by the body. Blood glucose tests are done to check for diabetes, monitor treatment of diabetes and check for diabetes that occurs during pregnancy.

Plasma freezers are designed to maintain a consistent temperature and to quickly recover to set-point temperature after a door. It has ability to store and transfuse plasma to patients. The intrinsic value of blood and blood components, combined with precise storage requirements makes blood plasma freezers a major component in facility management and risk reduction. It is constructed of corrosion resistant materials to ensure reliable performance. The inner doors are insulated to minimize product exposure during outer door openings.

Blood pressure measuring equipment comprises a sleeve with an inflatable chamber and a microphone, and an appliance connected by a line with the sleeve. The appliance comprises of a pressure sensor and a differentiator connected to the sensor output. The differentiator is connected with a regulator that regulates a vent valve in such a manner that the pressure in the chamber during the measurement phase, in which the systolic and diastolic pressures are measured, reduces at a constant rate. A Korotkoff tone identifier, which is connected through further elements with the microphone and the differentiator, ensures that only those signals from the microphone, which occur simultaneously with a heartbeat-induced pressure fluctuation are delivered as Korotkoff tones and evaluated for determination of the systolic and diastolic pressure.

Blood volume analyzer is used in conjunction with a single use diagnostic kit to measure blood volume by using tracer dilution technique. A tracer is injected into the blood stream of a living being and a plurality of mixed samples of blood and tracer are removed from the blood stream at a corresponding plurality of measured time intervals subsequent to the injecting step. The blood portion volume is automatically calculated from the determined blood portion volumes and time intervals.

Semi-Dry Blotters are equipped with corrosion resistant, long-lasting electrodes made from synthetic carbon. They are resistant to corrosion and built for homogeneous, fast and efficient transfer of nucleic acids & proteins. It is designed to produce an extremely uniform system for the transfer of proteins and nucleic acids.

Tank Blotters comprises of units, which hold up to 4 gel cassettes and transfer gels as large as 150x215 mm. All blotters feature an internal glass cooling base for temperature controlled runs and safety cover with power leads.

Blotting Trays are plastic trays designed for staining one or two criterion gels or performing western blot detection. The trays have a working capacity of up to 500 ml.